User's manual version: 1.6 copyright©2009 acard technology corp. Release: october 2009 attention: wait over 5 seconds to power on after shutdown to prevent the abnormal operation of the system. Hdd duplicate controller.
Copyright and trademarks the information of the products in this manual is subject to change without prior notice and does not represent a commitment on the part of the vendor, who assumes no liability or responsibility for any errors that appear in this manual. Acard and scside are the trademarks o...
Table of contents chapter 1 introduction ............................................................... 1.1 overview ........................................................................... 1.2 features ............................................................................ 1.3 specificatio...
29 30 30 31 31 31 32 32 32 33 33 33 34 35 35 35 35 35 35 35 35 36 5.6.11 auto start timer (ars-2055pf only) ....................... 5.7 usb mode (ars-2051f only) .......................................... 5.8 adv setup ......................................................................... 5.8.1 r...
Weee statement in order to cope with the increasing waste electrical and electronic equipment, reduce the use of landfill and incinerator, and prevent the harmful matter of waste equipment from entering the environment, the european union (eu) has set the directive on waste electrical and electronic...
Weee бюлетень ЧтобЫ сρaвиться с увеличивающимся ненуҗным электрическим и электронным оборудованием , уменъшите использование закапывания мусора и использования установки для сжигания отходов, препятствуйте вредному выбросам загрязнять окружановки среду, Европейский союз (ec) установил Директиву по Н...
Chapter 1 introduction 6 1.1 overview the four hdd duplicator models available are ars-2022nf/2035af/2051f/2055pf/2061f. The ars-2022nf and 2035af are standalone 1-to-1 and 1-to-5 ide hdd duplicators while the ars-2051f, 2055pf and 2061f are standalone 1-to-1, 1-to-5 and 1-to-11 sata hdd duplicators...
Chapter 2 installation 7 please verify that the product includes all required accessories and the necessary equipment are available before installation. 2.1 install ars-2022nf the ars-2022nf is pictured below. Before installation before connecting the power, verify that the local power supply voltag...
8 2. Connect the target hdd with the ata-133 ide cable to the white ide port on the ars-2022nf 4. Shown below is an ars-2022nf with all the hdds properly wired 3. Connect the power cable to cn4 (small 4p power port) on the ars-2022nf hdd duplicate controller manual.
9 2.2 install ars-2035af the ars-2035af is pictured below. Before installation before connecting the power, verify that the local power supply voltage matches the product. Prepare 1 source hdd for the ide/sata port and 5 target hdds. The capacity of the target hdds must be equal or higher than the s...
10 b. Connect the source hdd with the sata cable to the cn2 (s-master) black sata port on the ars-2035af 2. Connect the target hdds with the ata-133 cable to all of the black ide ports on the ars-2035af 3. Connect the power cable to cn7 (large 4p power port) on the ars-2035af hdd duplicate controlle...
11 4. Shown below is an ars-2035af with all the hdds properly wired 2.3 install ars-2051f the ars-2051f is pictured below. Before installation before connecting the power, verify that the local power supply voltage matches the product. Prepare 1 source hdd for the sata port and 1 target hdd. The cap...
12 2. Connect the target hdds with the sata cable to the black port (cn6) on the ars-2051f 1. Connect the source hdd with the sata cable to the cn8 blue port on the ars-2051f 3. Connect the power cable to cn4 (small 4p power port) on the ars-2051f hdd duplicate controller manual installation procedu...
13 4. Shown below is an ars-2051f with all the hdds properly wired 2.4 install ars-2055pf the ars-2055pf is pictured below. Before installation before connecting the power, verify that the local power supply voltage matches the product. Prepare 1 source hdd for the sata port and 5 target hdds. The c...
14 2. Connect the target hdds with the sata cable to the black port on the ars-2055pf 3. Connect the power cable to cn8 (large 4p power port) on the ars-2055pf 4. Shown below is an ars-2055pf with all the hdds properly wired hdd duplicate controller manual.
2.5 install ars-2061f the ars-2061f is pictured below. Before installation installation procedure before connecting the power, verify that the local power supply voltage matches the product. Prepare 1 source hdd for the sata port and 11 target hdds. The capacity of the target hdds must be equal or h...
2. Connect the target hdds with the sata cable to the black port on the ars-2061f 3. Connect the power cable to cn8 (large 4p power port) on the ars-2061f 4. Shown below is an ars-2061f with all the hdds properly wired 16 hdd duplicate controller manual.
Chapter 3 basic instructions 3.1 buttons and lcd there are four buttons and an lcd on the panel of hdd duplicate controller. 1. It shows a function or a message. 2. It’s used to scroll up function menus. 3. It’s used to scroll down function menus. 4. It’s used to execute a function. 5. It’s used to ...
Here we take ars-2055pf to demonstrate. 18 initialize sdram acard technology 2055pf ver: 1.09g 1 2 figure 1 shows the firmware version of ars-2055pf. Figure 2 shows initialize sdram's status.. Detect drives please wait ... 3 figure 3 shows detect drives's status. 1. Copy hdd 4 figure 4 shows the fir...
Chapter 4 board layout the board layout of ars-2022nf is shown as follows. The board layout of ars-2035af is shown as follows. 19 hdd duplicate controller manual.
The board layout of ars-2051f is shown as follows. The board layout of ars-2055pf is shown as follows. 20 hdd duplicate controller manual.
The board layout of ars-2061f is shown as follows. Hdd duplicate controller manual 21.
Chapter 5 functions the copy controller has 8 functions in total, with the 8th (adv setup) being a hidden system function that only appears when the esc key is pressed for 2 seconds until there is a beep. These are shown below. Here we take ars-2051f to demonstrate. 22 6-01. Language 6-03. Copy size...
Remark: guide to the menu options: ● main menu 7. Usb mode is supported in the ars-2051f. It is not supported by ars-2022nf. ● adv setup is menu option 8 in the ars-2051f. ● adv setup is menu option 7 in the ars-2022nf. ● adv setup's link option and usb auto-link features are not supported in the ar...
6-01. Language 6-02. Copy size 6-03. Startup menu 6-04. Auto compare 6-05. Copy with detect 6-06. Button sound 6-07. Device info 6-08. System info 6. Setup 6-09. Fast copy 6-10. Auto start drive 6-11. Auto start timer (ars-2055pf only) (ars-2055pf only) 7. Adv setup 7-01. Read error skip 7-02. Updat...
5.1 copy hd copy hd copies data directly from the source hard disk to the target hard disk. Before starting the copying process, please use option 6 select source to choose the source hard disk. Please make sure that the capacity of the target hard disk is equal or larger than the source hard disk. ...
Press ent to begin scan. The lcd will display the following info once the scan is complete, the lcd will display the corresponding results 4. Rescan bus 5.4 rescan bus choose option 4 from the menu: press ent to re-scan hardware. The lcd will display the following info. Scan-52mb/s 1% 236.4gb 1:15:0...
27 5.6.1 language this option is used to select the system's language support. By default this is set to english. Press ent to change the language settings. Language english 5.6.2 copy size this option is used to specify the size of the source hard disk for simplifying further copying operations. 6-...
5.6.4 auto compare this option automatically compares the source hard disk with the target hard disk after a copy operation is completed. Press ent to access option. By default it is set to off. Use the up and down arrow keys to choose on. Auto compare off 6-04. Setup auto compare 28 6-05. Setup cop...
29 5.6.8 system info this option displays system information. 6-08. Setup system info 5.6.9 fast copy (ars-2035af/2055pf only) this option displays fast copy. 6-09. Setup fast copy press ent and the lcd will display the following info. Use the up and down arrow keys to choose whether fast copy is on...
30 5.7 usb mode (ars-2051f only) this option allows a copy controller connected to the host computer's usb port to be operated from the pc. Press ent and the lcd will display the corresponding information as shown below. Switch usb mode? No usb l. H mode d1: - - - d2: - - - use the down arrow to sel...
31 5.8.1 rescan bus delay (ars-2022nf/2051f only) this function is used to set the time interval between the system's re-scans of all connected hdd devices. Press ent and the lcd will show the following info. 8-01. Adv setup rescan bus delay rescan bus delay 1sec press ent then use the up and down b...
32 5.8.4 compare firmware this function is used to compare the current system firmware version with the new version the user is upgrading to. This ensures that the downloaded firmware is the latest version. The message "last update f/w" indicates that it is the latest version. 8-04.Adv setup compare...
33 press ent to enter the following screen. Use the up and down buttons to confirm reset to factory defaults. Load default config? Yes load default ok if load default ok, this will be displayed on the lcd as shown below. 5.8.8 link option (for usb mode) – requires aec-4420dx this function is used to...
34 set to "on" using the up and down buttons, the ars-2051f will immediately enter usb mode on startup. Usb l.H mode d1:hdd d2:hdd this allows the ars-2051f to communicate with the pc through the usb cable. Remark: this option is only supported on the ars-2051f. It is not available for ars-2022nf/20...
Chapter 6 basic troubleshooting 6.1 lcd if the lcd blank after the device is turned on, check that the power cable is properly connected and that the power supply is on. 6.2 error message when the system is running a copy operation or hardware diagnostics, if the operation is manually terminated by ...
Appendix a lcd messages 1. Normal conditions: all data will be lost, erase?.................All data on the disc will be lost. Confirm the erasing of data. Analyzing.....................................................................................................Analyze the source disc. Audio dis...
No image in partition xx.......................................................There is no data image in partition xx. No valid hdd!.......................................................................... The system cannot find a hard disk. Partition damage............................................
Technical support form email address: support@acard.Com website: http://www.Acard.Com 38 model name* (ex: ars-2061f) firmware version* system configuration motherboard/system model* scsi host adapter/chip brand & model* scsi host bios version other i/o card* operating system* sata hdd brand & model*...