© 2015 accelerated concepts intellectual property. All rights reserved. Accelerated concepts, the accelerated logo and all other accelerated concepts marks contained herein are trademarks of accelerated concepts. All other marks contained herein are the property of their respective owners. Images ar...
Accelerated concepts, inc. © 2015 2 of 16 6200-fx troubleshooting guide v1.3 table of contents initial setup/power on ................................................................................................................................................. 3 startup and troubleshooting .........
Accelerated concepts, inc. © 2015 3 of 16 6200-fx troubleshooting guide v1.3 initial setup/power on before powering on the 6200-fx ensure you have the following equipment: usb modem sim card (optional, only required if modem uses a sim) ethernet cable 6200-fx power supply (or poe, see power section)...
Accelerated concepts, inc. © 2015 4 of 16 6200-fx troubleshooting guide v1.3 startup and troubleshooting.
Accelerated concepts, inc. © 2015 5 of 16 6200-fx troubleshooting guide v1.3 6200-fx with external modem 6200-fx with internal modem connections in order for the 6200-fx to function properly all connections must be correct. If the 6200-fx device is not working properly, first ensure that the unit ha...
Accelerated concepts, inc. © 2015 6 of 16 6200-fx troubleshooting guide v1.3 ethernet cable an ethernet cable is connected to both the ethernet port on the 6200-fx and the end device (client computer, at&t vpn 8200, router, etc.). If the device is a router or at&t vpn 8200, the ethernet cable should...
Accelerated concepts, inc. © 2015 7 of 16 6200-fx troubleshooting guide v1.3 power a 12-volt ac power supply, a passive poe injector cable, or an optional 12-volt battery pack must be used to power the 6200-fx. The 6200-fx device can only operate with one supply of power. Do not supply power to the ...
Accelerated concepts, inc. © 2015 8 of 16 6200-fx troubleshooting guide v1.3 ethernet options the 6200-fx device is by default configured for auto-negotiation, but can be configured for a different ethernet negotiation setting. Below is a list of the ethernet negotiation settings that the 6200-fx ca...
Accelerated concepts, inc. © 2015 9 of 16 6200-fx troubleshooting guide v1.3 do not place the 6200-fx device in a metal enclosure! Also, ensure that there are no other wireless communication devices (cell phones, wireless routers, etc.) within 1 ft. Of the unit location the placement of the 6200-fx ...
Accelerated concepts, inc. © 2015 10 of 16 6200-fx troubleshooting guide v1.3 restore default settings restoring a 6200-fx device to factory default settings will clear out the settings obtained from the 6200-fx’s remote configuration and load the factory default settings. To restore a 6200-fx devic...
Accelerated concepts, inc. © 2015 11 of 16 6200-fx troubleshooting guide v1.3 as of firmware version 2.150.61, which was released 2013-03-06, the default button works in the following way: the 6200-fx will only register that the default button has been pressed if the 6200-fx is powered on without a ...
Accelerated concepts, inc. © 2015 12 of 16 6200-fx troubleshooting guide v1.3 start-up the 6200-fx device is configured to go through a specific start-up sequence, as detailed below. 1. Immediately upon powering on, the usb led will illuminate yellow, verifying that power is being delivered to the 6...
Accelerated concepts, inc. © 2015 13 of 16 6200-fx troubleshooting guide v1.3 system status power is off power is on; early boot stage initializing modem downloading firmware (green bar moves downward) reconfiguring usb subsystem no modem or unsupported modem modem detected modem connected – session...
Accelerated concepts, inc. © 2015 14 of 16 6200-fx troubleshooting guide v1.3 real-time management below are details for all the commands that can be sent to a 6200-fx device, along with details as to what each command does. Remote control check status - the 6200-fx will immediately send its current...
Accelerated concepts, inc. © 2015 15 of 16 6200-fx troubleshooting guide v1.3 required network access for 6200-fx general connectivity the following ip addresses or domains need to be available to the 6200-fx through its wan cellular connection in order for the device to function properly and provid...
Accelerated concepts, inc. © 2015 16 of 16 6200-fx troubleshooting guide v1.3 technical support if you are having problems installing any of our products and need technical assistance, please call or email our help desk. Support@accelecon.Com +1 (813) 699-3110 support hours are 9am to 5pm est gmt – ...
