1 comtrend 1 port router installation guide ct-5072t.
Comtrend router installation 1 installing access point’s dsl service with a comtrend router thank you for selecting access point, inc. To be your internet service provider. This guide will walk you through connecting your dsl router and getting your dsl service up and running. This guide is for new ...
Comtrend router installation 2 login screen open an internet browser and go to http://192.168.1.1. You will be prompted with a login screen for the router. The default login name is root and the password is 12345. Device information screen once you are logged into the router, you will see the device...
Comtrend router installation 3 configure the dsl interface using the information from your dsl confirmation e-mail, enter the correct vpi and vci information for your installation. Your vpi and vci information may be different than what is pictured in this document. You must use the information from...
- comtrend router installation 4 do not make any changes to this page. Just select next ensure that pppoe is the wan service type, then click next..
- comtrend router installation 5 enter your pppoe username and password you will need to enter the pppoe username and password for your router. Your username and password can be found on your dsl confirmation e-mail. If you did not get your username and password, please contact our customer service ...
- comtrend router installation 6 click next on the routing screen. Click next on the dns server screen.
Comtrend router installation 7 once you get to the wan setup summary screen, click apply/save. This will save your router configuration at this point, the basic configuration of the router has been completed. To ensure that your dsl service is working, check the internet and adsl lights on the route...
- comtrend router installation 8 reset your login password for security reasons, you may want to reset the default password for the root user. Under the management option, select access control. In the select an account section, choose root. Once you have selected the root username, you will need to...
- comtrend router installation 9 troubleshooting so that access point can better assist you in case of a trouble, you will need to enable some remote management tools. On the left side of the window, select management, access control, then service access. Please make sure that the http and icmp opti...
