Accessibility Professionals Kitchen Appliance Lift Instruction Manual - page 13
1
2
1
4
5
3
6
10.
Fault finding
The Kitchen appliance lift is designed and tested to achieve optimum operation reliability and long life, provided that the
operation, maintenance and inspections are carried out in accordance with the prescribed instructions. If in spite of this a fault
appears you can get guidance about what to do according to the fault finding list below.
Remove the load from the platform before fault finding and repair work is carried out.
Fault finding, service and repair work shall made by competent persons only.
If any problem remains after you have taken actions in accordance with the list below you must contact a competent techni-
cian or you supplier.
11.
Spare parts list
If any component does not work or has broken, contact your supplier.
Only Granberg original spare parts must be used when replacing any
parts. Our warranty commitment may otherwise be invalidated.
Return of spare parts:
Contact Granberg prior to any return of parts.
Do not return any parts that have been worn out during normal opera-
tion or accidentally damaged. Only return worn or damaged parts if it is
considered that the fault is covered by our warranty conditions. In such
cases, return the parts without delay, otherwise the right to replacement
may be lost.
When ordering spare parts always quote the manufacturing number and
type.
Symptom
Action
The machine does not move
when a control signal is given.
Check that the fuse for the mains feed is not damaged.
Check that the mains plug is connected.
If the Kitchen appliance lift still does not move contact an authorized technician and/or
your supplier.
This shall as first action, after above check points, check that all cables are connected and
undamaged, and that the green light on the control box is lighting.
If it is not lighting the control box is probably defect. Order a new unit from Granberg.
Position:
Description:
1
Motor
2
Control unit
3
Mains cable
4
Wooden platform
5
Handheld control unit
6
Self-adhesive Velcro pads
Picture 1
When repair work has been carried out on the Kitchen appliance lift a complete functional test with full load shall be
made, before it is taken into use. (See section .6).