Accessibility Professionals Kitchen Appliance Lift Instruction Manual - page 8
5.
Alternative control devices
The operator shall have a clear view of the hazardous parts of the Kitchen appliance lift and its motions, but not directly within
the work area, as there is a risk that objects may fall out of the cabinet. (Due to limited space it can be necessary to place the
control devices is placed within the work area).
Control buttons
UP / DOWN of aluminium
The button unit is mounted
recessed in workbench front,
cabinet side etc.
A control position frame
for several control devices
can ordered, to be able to
control more lifting devices
and the lighting from one
position.
Remote control with hand-held control unit
The IR-receiver is placed above the cabinet and is connected to lift’s control device socket
See also section 5.1, ”Safe use”, regarding safe conditions and risks at handling the machine and
the load!
Frame for several control devices
If the control devices have been brought together to a common con-
trol station is it important to clearly mark which buttons control resp.
lifting device. This will decrease the risk for operating another lifting
device than the desired.
In order to prevent unauthorized use the control position can be
provided with a key switch.
Hand-held control unit
mounted on a spiral cable.
The control unit is provided
with a hook on the back-
side, as suspension device.
Self-adhesive Velcro pads are
included, to enable suspen-
sion position according to
your own choice.