Accessory Power BG-550D Instruction Manual - Removing Bg-550D
Removing BG-550D
To remove the BG-550D, turn your Canon dSLR Camera’s power OFF, and set the
(11) Vertical-Grip Operation Switch to the “OFF” position and then follow the above
steps in the reverse order. Be sure to reconnect your battery-compartment cover
to your Canon dSLR Camera.
Operating Instructions (continued):
Trouble Shooting:
If you are having trouble attaching the BG-550D to your Canon dSLR Camera,
please try the following:
- Be sure that you tighten the (3) Mounting Screw on the BG-550D into the
tripod socket on the bottom of your Canon dSLR Camera. You may tighten
the connection between BG-550D and your Canon Camera by twisting the
(5) Attachment Wheel to the right, following the arrow.
- Please be sure that you are attempting to connect the BG-550D with a Canon
T2i dSLR Camera
If you are having trouble getting power from the BG-550D, try the following:
- Verify a proper connection by carefully repeating the instructions for attaching
BG-550D to your Canon dSLR Camera. Completely remove the BG-550D from
your Canon dSLR Camera, and then reattach it. Please keep in mind that you
must tighten the (5) Attachment Wheel firmly.
- Check to make sure that the batteries have been properly inserted.
- If you are using AA rechargeable batteries, please make sure that all “+” and “-”
signs are aligned correctly.
- Make sure that the batteries you’ve inserted have a charge.
- Double check that the power to your Canon dSLR Camera is ON. The BG-550D
does not have a power switch, as it has been uniquely integrated with the power
function on your camera.
continued >>>