Accessory Power SLR Wireless RF Remote Instruction Manual

Summary of SLR Wireless RF Remote

  • Page 1

    Instruction manual slr wireless rf remote.

  • Page 2: Product Diagram

    Product diagram what’s in the box? Thank you for purchasing this accessory power slr wireless rf remote. This unit allows you to trigger your camera shutter and execute other camera functions wire- lessly. This remote utilizes 16-channel rf signal transmission for a reliable and rapid response every...

  • Page 3: Remote Functions

    Remote functions inserting the cr2 battery insert the included (c) cr2 battery into the (10) cr2 battery compartment on the (b) receiver. Connecting the receiver to your camera first, mount the (b) receiver onto the top of your camera with the (8) hot-shoe mount. Next, insert the (7) connection pin ...

  • Page 4: Troubleshooting

    Troubleshooting delayed shooting please make sure the (2) mode switch on the (a) wireless rf remote is switched to press the (1) remote shutter release down fully and hold. The camera will begin to focus and there will be 3 seconds until the shutter of the camera is triggered. Using the receiver lik...

  • Page 5: Spond When I Trigger The

    After following the setup instructions carefully, i can’t get my camera to re- spond when i trigger the (a) wireless rf remote. - please make sure you have properly connected the (7) connection pin into the remote port on your camera. Try re-inserting. - please make sure the channels on the back of ...

  • Page 6: Cautions

    - keep in a safe place free from dust, liquid and extreme temperatures - only use this device with the recommended power sources - keep out of reach of small children - when not in use, please disconnect batteries or power sources cautions product specifi cations frequency: 433mhz transmission range...

  • Page 7

    © 2010 accessory power all trademarks and brand names are the property of their owners.