Accton Technology Cheetah PCI Adapter Quick Installation Manual - Introduction
Cheetah PCI Adapter
3
Introduction
Accton’s Cheetah PCI Adapter is a dual-speed Fast Ethernet
card for PCI local bus compliant computers. A true plug-and-
play device, this card is auto-configurable upon power up and
also supports auto-negotiation to automatically select the
optimum speed and communication mode of an attached
device.
The Cheetah PCI Adapter complies with ACPI and OnNow/
PC98 and also supports Remote LAN Wakeup. By connecting
the Cheetah PCI Adapter’s Wake-On-LAN (WOL) cable, a
WOL-enabled computer can be managed remotely. Software
can be loaded and updated, configurations changed, data
backed up and inventory checked, all from a central location.
See “Remote LAN Wakeup” for more information.
Package Checklist
Accton’s Cheetah PCI Adapter includes:
• 1 Cheetah PCI Adapter (EN1207D-TX/WOL)
• 1 driver diskette
• 1 Wake-On-LAN cable
• 1 registration card (please return)
• This Quick Installation Guide
Immediately inform your dealer in the event of any incorrect,
missing or damaged parts. If possible, please retain the carton
and original packing materials in case there is a need to return
the product.
Note that new or updated driver information is available via
Accton’s Web site. To order the optional boot ROM, SW7149,
contact your local Accton dealer or reseller.
Please fill out and return the registration card to Accton. The
Cheetah PCI Adapter is covered by a limited lifetime warranty.