Accton Technology Cheetah PCI Adapter Quick Installation Manual - page 8
8
Quick Installation Guide
2. Select the “View Current Configuration” option from the
Main Menu to access the screen shown below. If you wish
to modify the current configuration, return to the Main Menu
and select “Setup New Configuration.”
3. The host computer’s BIOS automatically allocates the
necessary resources, such as the Interrupt and I/O Base,
to the Cheetah PCI Adapter. Although the Setup Program
will not allow you to change those resources, you can
change the settings displayed on the “Setup New
Configuration” screen (see below).
4. In the event of a problem with the Cheetah PCI Adapter,
use the Setup Program to run the card’s built-in diagnostics
(see the “SET1207D.TXT” file for specific instructions).
Should any of the diagnostic tests fail, reboot your