Cheetahswitch workgroup-3024 quick installation guide es3024 e0998-r03 150875-101.
Quick installation guide cheetahswitch workgroup-3024 high-density fast ethernet switch with 16 10base-t/100base-tx ports, and 2 slots for 4-port slide-in modules with 10base-t/100base-tx or 100base-fx ports copyright © 1998 by accton technology corporation. All rights reserved. No part of this docu...
Quick installation guide cheetahswitch workgroup-3024 1 contents introduction 1 package contents 1 description of hardware 1 mounting the switch 2 stacking switches on a flat surface 2 mounting switches in a rack 2 installing an optional module 2 connecting the switch system 3 making a connection vi...
Quick installation guide cheetahswitch workgroup-3024 2 3 mounting the switch this switch can be placed directly on your desktop, or mounted in a rack. Before you start installing the switch, make sure you can provide the right operating environment, including power requirements, sufficient physical...
Quick installation guide cheetahswitch workgroup-3024 4 5 3. Connect one end of the cable to an mdi port on the switch, and the other end to any mdi-x station port on the other device. When inserting an rj-45 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated...
Quick installation guide cheetahswitch workgroup-3024 6 7 be sure all network cables and connectors are properly attached to the connected device and the switch. See if your cable is functioning properly by using it for another port and attached device that displays valid indications when connected ...
Quick installation guide cheetahswitch workgroup-3024 8 9 switching functions - store-and-forward switching is used to forward traffic to other ports. This scheme ensures data integrity and provides a clean data stream. Flexible configuration - this switch is not only designed to segment your networ...
Quick installation guide cheetahswitch workgroup-3024 10 11 while, check for loose power connections, power losses or surges at the power outlet, and verify that the fans on back of the unit are unobstructed and running prior to shutdown. If you still cannot isolate the problem, then the internal po...
Quick installation guide cheetahswitch workgroup-3024 12 13 safety compliance underwriters laboratories inc. (usa) important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following specification list. E g a tl o v s n o it a c...
