Accu ACCU-Turn 7700 Operation And Maintenance Manual - page 6
ACCEPTANCE FROM TRANSPORTATION CARRIER
Carefully inspect all items received in this shipment.
If
there is damage or evidence of mishandling in transit, determine
the extent of damage and notify the transit company as well as ACCU
Industries, Inc. immediately.
Although we are not responsible for
damage incurred in transit, we will assist in the preparation and
filing of claims.
SAFETY INFORMATION
This manual has been prepared for the operator and those
responsible for the maintenance of the brake lathe.
Its purpose,
aside from proper maintenance and operations, is to promote safety
through the use of accepted practice.
READ AND UNDERSTAND THE SAFETY AND OPERATING INSTRUCTIONS
COMPLETELY BEFORE OPERATING THE MACHINE
In order to obtain maximum life expectancy and efficiency from your
brake lathe, follow the operating instructions and maintenance
manual carefully.
The specifications put forth in this manual were in effect at
the time of publication. However, owing to ACCU Industries' policy
of continuous improvement, changes to the specifications may be
made at any time without obligation on the part of ACCU Industries,
I n c .
Safety Instructions
1.
Read, understand and follow the safety and operating
instructions found in this manual.
Know the limitations and
hazards associated with operating the machine. A safety rules
decal is installed on the machine to serve as a reminder of
basic safety practice.
It should be read before attempting
to use the brake lathe.
2.
Special Precautions:
Th'is ACCU-Turn brake lathe was designed
to machine the portions of the brake drum and disc brake rotor
surfaces that come in contact with the friction
material.
When used according to the instructions herein,
this lathe will perform satisfactorily within the workpiece
size range designated for this model.
During the machining operation, the workpiece rotates.
Be
especially cautious of rotating wheel lugs, spokes and
mounted accessories.
3