- DL manuals
- Accu-Chek
- Blood Glucose Meter
- ACTIVE
- Getting Started Manual
Accu-Chek ACTIVE Getting Started Manual
Summary of ACTIVE
Page 1
Experience what’s possible accu-chek ® meter guide.
Page 2
Accu-chek mobile 3 getting started guide 4-6 error messages 7-9 accu-chek performa 10 getting started guide 11-12 error messages 13 accu-chek performa nano 14 getting started guide 15-16 error messages 17 accu-chek active 18 getting started guide 19-21 error messages 22-23 accu-chek lancing system 2...
Page 3
1. Starting to use the accu-chek mobile system getting started guide - accu-chek ® mobile www.Accu-chek.Com.Au accu-chek enquiry line: 1800 251 816 mobile accu-chek ® mobile open the tip cover a completely as far as it will go. Only then will you be able to open the cassette compartment and insert t...
Page 4
Remove the rotatable cap for setting the penetration depth a . Place the cap c back on again. Insert a new lancet drum b (white end first). You now have 6 new and sterile lancets at your disposal. Rotate the cap d of the finger pricker until the desired penetration depth is level with the indicator....
Page 5
The test area has drawn up too little blood or control solution. Repeat the test with a larger amount of blood or control solution. Remove the dirt from the inside of the cassette tip. Press (continue) if you want to go directly to the clean menu. • your blood glucose value may be very low. If the w...
Page 6
Www.Accu-chek.Com.Au accu-chek enquiry line: 1800 251 816 performa accu-chek ® performa move into the shade or shield the meter with your body, for example. Repeat the test. Move to a place where the ambient temperature is not higher than +40 °c and wait for the temperature of the meter to adjust to...
Page 7
Getting started guide - accu-chek ® performa 3. Perform a blood glucose test 1-3. • wash and dry your hands. • prepare the lancing device. • take one test strip from the container. Close the container tightly. Touch the blood drop to the front edge of the yellow window of the test strip. Do not put ...
Page 8
Www.Accu-chek.Com.Au accu-chek enquiry line: 1800 251 816 performa nano accu-chek ® performa nano if the error message continues, please call roche error messages - accu-chek ® performa = the test strip is damaged. Remove the test strip and reinsert it, or replace it if damaged. Or the code chip is ...
Page 9
6. Getting started guide - accu-chek ® performa 3. Perform a blood glucose test 1-3. • wash and dry your hands. • prepare the lancing device. • take one test strip from the test strip container. Close the container tightly. Gently squeeze your finger to assist the flow of blood. This helps you get a...
Page 10
Www.Accu-chek.Com.Au accu-chek enquiry line: 1800 251 816 active accu-chek ® active error messages - accu-chek ® performa = the test strip is damaged. Remove the test strip and reinsert it, or replace it if damaged. Or the code chip is incorrect. Turn off the meter and insert a new code chip. If the...
Page 11
This quick reference guide does not replace the detailed instructions for use for your accu-chek active blood glucose meter. Please refer to the safety instructions contained in the instructions for use. Removing the protective film from the battery coding testing blood glucose a b getting started g...
Page 12
You did not insert the test strip correctly or completely. Hold the test strip so the arrows printed on it and the orange square face upwards. Without bending it, gently push the test strip into the test strip guide in the direction of the arrows until you feel it lock into place. You removed the te...
Page 13
Www.Accu-chek.Com.Au accu-chek enquiry line: 1800 251 816 lancing systems no lancet handling press to prime 1 click to prick 2 twist & back for next lancet 3 3 simple steps to teach and learn used drum getting started guide - accu-chek ® multiclix accu-chek ® lancing system 24 25.
Page 14
Exchange drum turn dial to select depth setting. For beginners, select a lower setting. (start with level 1.) you’re ready to test: press, click, and twist. D c set penetration depth getting started guide - accu-chek ® multiclix a remove cap. C when number 1 appears in the display, last lancet is in...
Page 15
Prepare remove cap, insert a lancet, twist off cover and replace cap 1 select lancet depth 2 press priming button down; the transparent release button turns yellow 3 3 simple steps to teach and learn getting started guide - accu-chek ® softclix getting started selecting penetration depth getting sta...
Page 16
5 tips for gentle blood sampling. Lancing correctly with accu-chek lancing devices keeps discomfort to a minimum. You can test more comfortably with these five easy steps: alternate fingers daily and take the necessary steps to ensure good blood circulation. Ensure hands are clean and dry. Lance on ...
Page 17
For people with diabetes, use only as directed. Consult your healthcare professional for advice. Accu-chek, accu-chek mobile, accu-chek performa, accu-chek performa nano, accu-chek active, accu-chek multiclix, accu-chek softclix and clixmotion are trademarks of roche © 2011 roche diagnostics. Roche ...