AccuBANKER AB300 User Manual - Cleaning of The Machine

A) Cleaning the Optical Sensors

It is important to clean all of the sensors in the unit to avoid any paper par-

ticles or dust from sticking to the sensors. This should be done everyday, if 

possible. The glass surfaces of the sensors may be wiped with a soft cloth 

soaked with alcohol. 

B) Cleaning the Inside of the Machine Periodically

It is necessary to clean the inside of the machine once a month or when 

needed. Unplug the machine and open the stacker. Use compressed air, 

such as AccuClean to lightly blow out dust from the interior. 

C) Additional Recommendations

Avoid operating the machine in a dusty or dirty room. 

Cleaning of the Machine

!

WARNING: BEFORE DOING ANY CLEANING, TURN THE POWER SWITCH OFF AND DISCONNECT 

THE POWER CORD FROM THE MACHINE. KEEP IN MIND THAT PROBLEMS OR DEFECTS

THAT ARISE FROM LACK OF PERIODIC MAINTENANCE ARE NOT COVERED BY THE WARRANTY.

10