AccuBANKER AB300 User Manual - 3.1 Power Up

3.1 Power Up

Open the front panel (banknote stacker). Connect the 12V adapter to a 

power outlet and to the jack at the rear of the machine; the unit will con-

duct a self-check by spinning the rollers several times. The counting num-

ber and batch number displays will both show “0” when the unit is ready. 

Note:

 Refer to section 5.0 for any self-test codes. Be sure to unplug the 

machine when not in use. 

3.2 Counting mode

The default mode of the machine is counting mode. All banknotes placed 

in the hopper will be counted automatically

. If banknotes begin to fly out 

of the machine during the counting, press the “restart” button to stop the 

counting. Then, press the “restart” button to begin counting again.

3.3 Batch Function

Batches can be set by pressing the “+50,” “+10” and “+1” keys. Any 

combination can be used to set the required batch. The preset batch is 

displayed on the right side. The actual count will be displayed on the left 

side. In order to remove and clear the preset batch, press, “restart” key.

3.0 Operations

16