Summary of MB 119
Page 1
Caseback markings model number calibre number battery number.
Page 2
Care of your watch avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; thi...
Page 3
Care of your watch avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets. 2. Genera...
Page 4
Care of your watch avoid harmful chemicals, solvents & gases 1. Avoid wearing your watch in the presence of strong chemicals, solvents or gases. 2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint. Periodic inspe...
Page 5
Care of your watch important 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep your watch clean wipe off any moisture that adhere...
Page 6
Bracelet adjustment the bracelet requires a small adjustment and the model has a z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole..
Page 7
Bracelet adjustment the bracelet requires a significant adjustment or the model does not have a z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch. 3. Follow the instructions in the after sales service section...
Page 8
Resistance to water indications on dial or caseback light spray, perspiration, light rain, etc. Swimming, etc. Dial caseback - water resistant ok x water resistant 50m (5 atm) water resistant ok ok water resistant 100m (10 atm) water resistant ok ok water resistant 150m (15 atm) and deeper water res...
Page 9
Quartz analogue operating instructions position a position b.
Page 10
Quartz analogue operating instructions please note: the second hand will not start moving until the crown has been returned to position a. To set the time: 1. Gently pull out crown to position b. 2. Turn crown either way to correct time. 3. Push in crown to position a..
Page 11
Quartz analogue with date operating instructions 24 hour hand second hand date date position may be located at different position depends on model. 1st position 2nd position minute hand normal crown position.
Page 12
Quartz analogue with date operating instructions setting the time: 1. Pull the crown out to the 2nd position. 2. Turn the crown to set hour and minute hands. 3. When the crown is pushed back to the normal position, second hand begins to run. Setting the time: 1. Pull the crown out to the 1st positio...
Page 13
Quartz analogue with date operating instructions for calendar models positions: a b c.
Page 14
Quartz analogue with date operating instructions to set the calendar/date: 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date, clockwise to adjust the day. 3. Push in crown to position a. Note: the day will start to change at 11.25 p.M. And complete its change by 12 ...
Page 15
Quartz analogue operating instructions with date: 6p29 / 6p20 / 6p21 positions: a b c day 24 hour display date positions: a b c day age of the moon date.
Page 16
Quartz analogue operating instructions with date: 6p29 / 6p20 / 6p21 to set the time/day: 1. Gently pull out crown to position c. 2. Turn crown either way to set the time. 3. Push in crown to position a. To set the day of the week: 1. Gently pull out crown to position c. 2. Turn crown clockwise to a...
Page 17
Quartz analogue operating instructions with date: 6p29 / 6p20 / 6p21 to set the date: 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date. 3. Push in crown to position a. To set the moon age: note: more accurate settings can be made during a new moon (when the centre ...
Page 18
Quartz analogue operating instructions with date: 6p29 / 6p20 / 6p21 to read the moon age: note: the age of the moon is determined by the period between each new moon. This period is approximately 29.5 days. The moon dial can be used as a guide to moon phase and tides. New moon moon’s age: 0 spring ...
Page 19
Quartz analogue operating instructions with date: 6p27 / 6p77 day (of the week) hour hand 24 hour hand second hand 1st position 2nd position date minute hand normal crown position.
Page 20
Quartz analogue operating instructions with date: 6p27 / 6p77 setting the day: 1. Pull the crown to the 2nd position to stop the second hand at 0 (12 o’clock). 2. Turn the hour/minute hands in a clockwise direction to set a day. In order to set the day, you must advance the hour hand by 24 hours per...
Page 21
Quartz analogue operating instructions with date: 6p27 / 6p77 setting the time: after setting the day, set the hour (and 24hour) and minute hands. 1. Turn the hour/minute hands in a clockwise direction to set the time. 2. To ensure time is set accurately, first turn the minute hand 5 minutes ahead o...
Page 22
Quartz analogue operating instructions with date: 6p27 / 6p77 setting the date (by quick operation): pull the crown out to the 1st position. Turn the crown counter-clockwise to set the date quickly. Note: do not set the date between the hours 9:00 p.M. And 0:30 a.M. The date may not change correctly...
Page 23
Setting the time: 1. Pull the crown out to the 1st position. 2. Turn the crown to set hour and minute hands. 3. Push the crown back to the normal position. 1st position minute hand hour hand normal crown position miyota watch movement operating instructions.
Page 24
How to assemble your charmed watch with additional beads lobster clasp (a) “o” ring chain (b) safety chain (d) stopper (c) stopper (c) stopper (c) stopper (c).
Page 25
How to assemble your charmed watch with additional beads step 1: remove the lobster clasp (a) by gently unscrewing at the point where the snake bracelet meets the clasp. Step 2: remove the “o” ring chain (b) by gently unscrewing at the point where the snake bracelet meets the chain. Step 3: remove a...
Page 26
How to assemble your charmed watch with additional beads step 5: re-attach lobster clasp (a) by screwing the clasp to the bracelet fully, taking care to ensure a secure fit. Step 6: re-attach “o” ring chain (b) by screwing the chain to the bracelet fully, taking care to ensure a secure fit. Step 7: ...
Page 27
Charmed special care instructions to ensure the best level of safety and security for your watch and beads it is recommended that after beads are added to the bracelet, a stopper is used to keep them in place. When using beads on your watch, a safety chain is also suggested as it helps to keep both ...
Page 28
Charmed special care instructions should you need to return your accurist charmed watch to us for any service or repair, please ensure you remove all beads and charms before sending your watch in. Accurist cannot be held responsible for any beads or charms. All accurist charmed models are either ste...
Page 29
Charmed special care instructions avoid temperature extremes: 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely ...
Page 30
Charmed special care instructions avoid wet conditions: 1. This watch is not designed to withstand submersion in water. Avoid strong shocks: 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting s...
Page 31
Charmed special care instructions maintaining your watch: 1. A regular 4 to 5 years service by an authorised accurist technician will ensure trouble free operation. Important 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediat...
Page 32
Ceramic watch special care instructions every care has been taken in the manufacture of this ceramic watch but due to the nature of the material used extra care should be taken. The ceramic although scratchproof is not shatterproof therefore care must be taken to avoid dropping or knocking the watch...
Page 33
Ceramic special care instructions important: • ceramics will not wear over time. • ceramics are scratch-resistant. • ceramic is a naturally porous material. • ceramic is fragile and should be handled with care. You should note that whilst our guarantee covers the watch movement the ceramic parts and...