- DL manuals
- Accurist
- Watch
- MB 119
- Operating Instructions Manual
Accurist MB 119 Operating Instructions Manual
Summary of MB 119
Page 1
Caseback markings w mb 119 cal 0t10 sr927w accurist watches logo model number calibre number battery number.
Page 2
Position a bottom right (br) bottom left (bl) dial c (hour dial) dial b (seconds dial) dial a (minute dial) top left (tl) top right (tr) position b position c os60, os10 & ot10 operating instructions.
Page 3: To Set The Time:
To set the time: 1. Gently pull out crown to position c. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set the date: 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date. 3. Push in crown to position a. Using the chronograph: 1. Press br ...
Page 4: Note:
Os60, os10 & ot10 operating instructions continued . . . 3. Press br button to reset the chronograph 4. When you have finished with the chronograph function, press br button again; this re-starts the small second hand on dial b. Note: after 30 seconds the second hand on dial b will stop at the zero ...
Page 5: Chronograph Zero Set:
Chronograph zero set: this procedure is only necessary when the battery is replaced, or when the chronograph hands do not return to the ‘0’ position, when the chronograph mode is selected. 1. Gently pull out crown to position c. 2. Push tr button to advance the sweep second hand to the 12 0’clock po...
Page 6
Position a bottom right (br) date indicator chronograph minute hand chronograph second hand top right (tr) day indicator position b position c (the angle of this fanshaped day indicator may vary from model to model). Fs60 operating instructions.
Page 7: To Set The Time:
To set the time: 1. Gently pull out crown to position c. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set the date: 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date. 3. Push in crown to position a. Note: if the date is set between th...
Page 8: To Set The Day:
Fs60 operating instructions continued . . . To set the day: 1. Gently pull out the crown to position b. 2. Turn the crown anti-clockwise to adjust day. 3. Push in crown to position a note: if the date is set between the hours of around 11.00pm and 2.00am, the date may not change on the following day...
Page 9: Using The Chronograph:
Using the chronograph: 1. Press tr button to start and stop chronograph. 2. Press br button to reset the chronograph. (the second and minute hands will return to the 12 o’clock (0) position) chronograph zero set: this procedure is only necessary when the battery is replaced, or when the chronograph ...
Page 10
Position a top right (tr) bottom right (br) small second dial 24 hour dial chronograph minute counterhand position b position c cal os20 operating instructions.
Page 11
For timing events up to 1 hour 1. To start chronograph press button tr. 2. To stop chronograph press button tr 3. To return hand to zero position press button br troubleshooting - if your watch receives a knock and the second hand is not on zero: 1. Pull out crown to position c 2. Press tr to advanc...
Page 12: Care Of Your Watch
Care of your watch avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; thi...
Page 13: Avoid Strong Shocks
Avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets 2. Generally, your watch is n...
Page 14: Periodic Inspection
Avoid harmful chemicals, solvents & gases 1. Avoid wearing your watch in the presence of strong chemicals, solvents or gases. 2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint. Periodic inspection 1. A regular ...
Page 15: Important
Important 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep your watch clean wipe off any moisture that adheres to the case, glas...
Page 16: Bracelet Adjustment
Bracelet adjustment the bracelet requires a small adjustment and the model has a z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole..
Page 17: Z-Type Clasp.
The bracelet requires a significant adjustment or the model does not have a z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch.
Page 18: Resistance To Water
Resistance to water indications on dial or caseback light spray, dial caseback perspiration, swimming light rain etc... Bathing, etc... - water resistant ok x water resistant water resistant ok ok 50m (5 atm) water resistant water resistant ok ok 100m (10 atm) water resistant water resistant ok ok 1...
Page 19
Diving: skin diving: scuba diving: when using a diving without diving with helium enriched an air tank an air tank environment x x x x x x ok x x ok ok x.
Page 20
Resistance to water continued . . . Important - never pull out the crown when the watch is wet. • tighten screwlock crown completely • water resistance is not a permenant property. We strongly recommend you return your watch for resealing every 4 - 5 years and/or when changing batteries • “water res...