1. DL manuals
  2. Accusplit
  3. Heart Rate Monitor
  4. EAGLE EAGLE 920HRM
  5. Instructions Manual

Accusplit EAGLE EAGLE 920HRM Instructions Manual

Manual is about: Accusplit Owner's Manual Heart Rate Monitor EAGLE 920HRM

Summary of EAGLE EAGLE 920HRM

  • Page 1

    Accusplit eagle 920hrm heart rate monitor 1.0 introduction thank you for your purchase. This watch includes 5 functional modes: current time, heart rate alert, daily alarm, chronograph and timer mode. With this watch, you also get ecg accurate heart rate readings without the use of a chest strap! Ho...

  • Page 2

    4.0 button operation summary [mode] button • press the button to select one of the 5 functional modes • in functional modes: press and hold the button to select setting display • in any setting display: press the button to choose between different settings. Press and hold the button to exit setting ...

  • Page 3

    Functional modes this watch includes 5 functional modes: 1) current time mode 2) heart rate alert mode 3) daily alarm mode 4) chronograph mode 5) timer mode. Every functional mode has one or more functional displays; these functional displays provide the supplementary information to the correspondin...

  • Page 4

    6.1 setting the current time mode to set the current time mode to set the current time and date, and their display formats, press and hold the [mode] button for about 2 seconds to select the setting display (the second digits will start flashing). The setting sequence • when the seconds digits start...

  • Page 5

    7.0 about heart rate measurement in exercise or sports, your heart naturally speeds up in pumping blood to the body in accordance with your increased energy level. This watch can calculate that increase expressed as the number of beats per minutes (bpm) to determine a safe target heart rate for each...

  • Page 6

    7.1 heart rate measurement heart rate measurement • in any functional mode, press the 6:00 sensor with your index finger and your middle finger place on the 12:00 sensor located on the face of the watch. • rest your thumb on the side of your wrist. Make sure the sensor on the back of the watch sits ...

  • Page 7

    8.0 heart rate alert function about the heart rate alert function • by presetting a target heart rate range, you can activate the heart rate alert function. This function helps prevent the user from going over or under a target heart rate. • in course of doing exercise or sports: when the user takes...

  • Page 8

    8.1 heart rate alert mode when heart rate alert function is on the following displays will be appeared on the display every 2 seconds: 1) upper limit display - the preset upper limit that set for the heart rate alert function 2) lower limit display - the preset lower limit that set for the heart rat...

  • Page 9

    8.2 setting the heart rate alert mode to set the heart rate alert mode to preset your target heart rate: 1) input your target heart rate range (lower and upper limits), or 2) i n p u t y o u r a g e a n d g e n d e r ( l o w e r a n d upper limits will be automatically calculated). To set the heart ...

  • Page 10

    9.0 daily alarm mode daily alarm mode • the alarm time (hours, minutes) appears on the display. To turn the daily alarm on and off • press the [start/stop] button once to choose on or off. • when the daily alarm indicator ' ' appears (the daily alarm is on), the watch starts beeping at the alarm tim...

  • Page 11

    9.1 setting the daily alarm mode to set the daily alarm mode to set the daily alarm mode: press and hold the [mode] button to select the setting display (the ' hour ' digits will start flashing). The setting sequence • when the ' hour '' digits start to flash, press the [mode] button to select betwe...

  • Page 12

    10.0 chronograph mode chronograph mode chronograph mode measures 2 different periods of time: 1) elapsed time 2) cumulative elapsed time chronograph display • the display shows the 'zero' display, if the watch or the chronograph has been reset. • the chronograph mode indicator ' chr ' exhibits on th...

  • Page 13

    10.1 using the chronograph mode to use the chronograph mode • in 'zero' display, press the [start/stop] button once to start the counting. When it is counting, press the [start/stop] button once again to stop the counting, and the elapsed time of which the chronograph is counting will appear. • when...

  • Page 14

    11.0 timer mode timer mode • this watch has a countdown timer to keep track of a faxed period of time (target time) entered by the user. The target time • the user can set a target time of up to 99 hours, 59 minutes 59 seconds. Timer display • the timer mode indicator ' tmr ' exhibits on the upper r...

  • Page 15

    11.1 setting the timer mode to set the timer mode • to set the target time in timer mode, press and hold the [mode] button for about 2 seconds (the ' hour ' digits will start flashing) the setting sequence • when the ' hour ' digits start to flash, press the [mode] button to move the flash following...

  • Page 16

    11.2 using the timer mode to use the timer mode • once a target time has been set (for example 30 minutes), press the [start/stop] button once to start the countdown. The countdown time will be displayed continuously throughout the countdown. • to stop countdown, press the [start/stop] button once. ...

  • Page 17

    12.0 specifications current time mode • hour, minute and second • month, day, day of week and year • 12 / 24 hour format selectable • month-day/day-month selectable • auto calendar from year 2000 to 2099 • hourly chime on the hours hearth rate alert mode • measuring range: 43 to 200 beats per minute...

  • Page 18

    13.0 potential causes for: no heart rate reading or long response time 1) cause: dry skin. Solution: apply conductive gel or saliva thoroughly to fingers and wrist area. (even water will help if conductive gel is not available). 2) cause: fingers are not placed firmly over the sensors. Solution: mak...