Accusplit EAGLE EAGLE 920HRM Instructions Manual - page 4
6.1 Setting the Current Time Mode
To Set the Current Time Mode
To set the current time and date, and their display formats, press and hold the [mode] button
for about 2 seconds to select the setting display (the second digits will start flashing).
The Setting Sequence
•
When the seconds digits start to flash, press the [mode] button to move the flashing
following the setting sequence of the adjacent diagram or press the [start/stop] or [reset]
button to reset the second digits to zero.
•
If one of the settings (minute, hour, year, month, date) is flashing, press the [start/stop]
or [reset] button to scroll through the setting (hold the button down to scroll the setting at
a faster pace).
•
When the '
month-date
' or '
date-month
' digits is flashing, press the [start/stop] or [reset]
button to switch between month-date ('
m
' icon appear) and date-month ('
d
' icon appear).
•
When the '
12
' or '
24
' icon is flashing, press the [start/stop] or [reset] button to switch
between '
12
' (12 hour format) and '
24
' (24 hour format).
•
When the beep '
on
' or '
oF
' icon is flashing, press the [start/stop] or [reset] button to
switch between '
on
' (key tone ON) and '
oF
' (key tone OFF).
•
When the designated setting appears, press and hold the [mode] button for about 2
seconds to exit the setting sequence. The setting display will change to Current Time
Mode automatically if NO key-stoke has been activated for about 1 minute.
ACCUSPLIT
EAGLE
920HRM Instructions
4 of 18