1. DL manuals
  2. Acer
  3. Cell Phone
  4. Liquid Z530
  5. Service Manual

Acer Liquid Z530 Service Manual

Other manuals for Liquid Z530: User Manual

Summary of Liquid Z530

  • Page 1

    Z530 service guide level1~2 1 version 1.0 service guide z530

  • Page 2

    Z530 service guide level1~2 2 version 1.0 system spec features……………………………………………………………………………………………………..3 system block diagram……………………………………………………………………………………..4 product 6six view …………………………………………………………………………………………...5 software upgrading…………………………………………………………………………………………6 sd card upload sop……………………………...

  • Page 3: Features

    Z530 service guide level1~2 3 version 1.0 features.

  • Page 4: System Block Diagram

    Z530 service guide level1~2 4 version 1.0 system block diagram.

  • Page 5: Product Six View

    Z530 service guide level1~2 5 version 1.0 product six view.

  • Page 6

    Z530 service guide level1~2 6 version 1.0

  • Page 7

    Z530 service guide level1~2 7 version 1.0 software upgrade sop 1. Install usb driver 1.1 run “install.Bat” which in driver_auto_installer_v1.352.00 2. When you upgrade the fw, you can see the follow item if the driver is install ok.

  • Page 8

    Z530 service guide level1~2 8 version 1.0 3. Upgrade phone sw 3.1 open “flash tool” 3.2 load “scatter file”, tap scatter loading choose “mt6582…txt” and loading.

  • Page 9

    Z530 service guide level1~2 9 version 1.0 3. Choose ”firmware upgrade” and then click the “download”. Note：step1~3，the device is power off and not connect the computer 3.3 download finished when show this page.

  • Page 10

    Z530 service guide level1~2 10 version 1.0 **if mb changed or repaired, please do cid modification** after flash image if you don’t execute “cid modification” after flash, there might be some app or function not workable. **cid modification sop** 1. Dial #2237243# (its meaning is #cid#) to enter mai...

  • Page 11

    Z530 service guide level1~2 11 version 1.0 5. Press ok button as the indicated location no.4. Sw (sd card) full upgrade sop 1. Go to settings —> about phone..

  • Page 12

    Z530 service guide level1~2 12 version 1.0 2. After you record down “build number”, power off the device. 3. Copy the upgrade file to root path of external sd card, and insert to the device. Normally, the upgrade file would be update-acer_av0l0_z530_0.012.00_emea_gen1-user- sd .Zip but if we need to...

  • Page 13

    Z530 service guide level1~2 13 version 1.0 5. Press volume down to “apply update from sdcard” and press power key to trigger next step. 6. Press volume up/down to select the update file and press power key to trigger next step. After you press power key, you should see the device works like figure 5...

  • Page 14

    Z530 service guide level1~2 14 version 1.0 system update. 7. Once the update success, you can see some information from the screen. You should see the “install from sdcard complete” like below. 8. Please choose “reboot system now” to boot to android os. Double confirm the build version from settings...

  • Page 15: Faq:

    Z530 service guide level1~2 15 version 1.0 image version of the update file. Faq: some possible update fail reason: (1) if the screen shows install fail. If could be possible that you are trying to apply a wrong update package. Please make sure you use the correct update-xxx-sd.Zip for correct sku. ...

  • Page 16

    Z530 service guide level1~2 16 version 1.0 pppppppppp: acer kc pn (2-5-3 code) which is from the bom by pm, 10 characters, without dots. Yww: 1 digit of year and 2 digits for week code. Y is for the last digit of year. For example: 9 if for 2009, 0 is for 2010, 1 for 2011, etc. Ww (week code) is cou...

  • Page 17

    Z530 service guide level1~2 17 version 1.0 1. Press [….] button to choose correct modem database and ap database. [figure 3] figure 3. Select modem database and ap database. 2. Please press "enter meta mode" button, wait a second see the words change to “please plug.

  • Page 18

    Z530 service guide level1~2 18 version 1.0 phone...” and then connect the usb cable to the computer and device link .[figure 4] figure 4. Enter meta mode 3. When device into “meta mode” , ui will enable “exit meta mode”、“read”、”write”.

  • Page 19

    Z530 service guide level1~2 19 version 1.0 button , and disable “enter meta mode ” button .[figure 5] figure 5. Enter meta mode..

  • Page 20

    Z530 service guide level1~2 20 version 1.0 b. Read sn/snid 1. Check sn and snid feature items: [figure 6] figure 6. Check serial number and snid item..

  • Page 21

    Z530 service guide level1~2 21 version 1.0 2. Click read button [figure 7] figure 7. Click read button.

  • Page 22

    Z530 service guide level1~2 22 version 1.0 3. Sn and snid are shown in themselves’ “value” column separately. The result of each performed operation is represented by “p” (pass) or “f” (failed) in the bottom list. The final result is shown in top right “status” area. [figure 8] figure 8. Read serial...

  • Page 23

    Z530 service guide level1~2 23 version 1.0 write sn/snid 1. Check serial number feature items , double click serial number“value” field , enter new sn , then click “write” button. [figure 9] figure 9. Check serial number and double click “value” field..

  • Page 24

    Z530 service guide level1~2 24 version 1.0 2. Pass or fail will show in “status” filed. [figure 10] figure 10. Write serial number result..

  • Page 25

    Z530 service guide level1~2 25 version 1.0 exit meta mode when all test complete, click “exit meta mode” . Device will exit meta mode and into charging mode. [figure 11] figure 11. Test complete, exit meta mode..

  • Page 26

    Z530 service guide level1~2 26 version 1.0 device disassembling and assembling procedure disassembly procedure 工具需求 1. Phillips screw-driver #00 2. Torx screw-driver t5 3. Opening tool 4. Cleaning cloth 5. Esd tweezers 6. Esd wrist strap slightly lift the battery cover..

  • Page 27

    Z530 service guide level1~2 27 version 1.0 use an opening tool to remove the battery from the device. Loosen 7 screws from the housing at the location indicated with phillips screw-driver #00 weee annex vii parts: battery.

  • Page 28

    Z530 service guide level1~2 28 version 1.0 1. The hooks are at the location indicated. 2. Insert the opening tool in between the chassis and the housing to release the hooks at the location indicated..

  • Page 29

    Z530 service guide level1~2 29 version 1.0 lift the housing by following the direction of the arrow. Remove the device label from the chassis carefully..

  • Page 30

    Z530 service guide level1~2 30 version 1.0 disassemble the main antenna box from the lower case. Use an opening tool to disassemble the speaker from the main antenna. Remove the mylar from the tp fpc connector. Weee annex vii parts: pcba mb.

  • Page 31

    Z530 service guide level1~2 31 version 1.0 use an opening tool to disconnect the tp fpc. Disconnect the rf coaxial cable from the main board carefully. Disconnect the rf coaxial cable from the sub board carefully..

  • Page 32

    Z530 service guide level1~2 32 version 1.0 use an opening tool to disconnect the lcm fpc from the main board. Remove the mylar from the main fpc connector. Use an opening tool to disconnect the tp fpc..

  • Page 33

    Z530 service guide level1~2 33 version 1.0 use an opening tool to disconnect the main camera from the main board. Remove the mylar from the front camera fpc connector. Use an opening tool to disconnect the front camera fpc connector..

  • Page 34

    Z530 service guide level1~2 34 version 1.0 disassemble the front camera from the main board. Remove the mylar from the sub board fpc connector. Use an opening tool to disconnect the sub board fpc connector..

  • Page 35

    Z530 service guide level1~2 35 version 1.0 lift up and disassemble the sub board from the chassis carefully. Disassemble the main fpc from the chassis. Use an opening tool to disassemble the receiver from the chassis carefully. The disassembling process is done.

  • Page 36

    Z530 service guide level1~2 36 version 1.0 assemble the receiver to the chassis. Assemble the 2 nd mic rubber to the chassis. Assemble the main fpc to the chassis. Assembly procedure.

  • Page 37

    Z530 service guide level1~2 37 version 1.0 1. Assemble the main board to the chassis. 2. Connect the main fpc to the main board. 3. Stick the mylar to the main fpc connector. Connect the lcm fpc to the main board. Connect the front camera to the main board..

  • Page 38

    Z530 service guide level1~2 38 version 1.0 1. Stick the mylar to the from camera connector. 2. Stick the copper foil to the front camera and main board as the indicated position. Remove the protect film as the indicated position. Connect the main fpc to the sub board..

  • Page 39

    Z530 service guide level1~2 39 version 1.0 assemble the sub board to the chassis. Stick the mylar to the sub board fpc connector. Assemble the main camera and connect the camera fpc to the main board..

  • Page 40

    Z530 service guide level1~2 40 version 1.0 1. Connect the rf coaxial cable to the main board. 2. Connect the rf coaxial cable to the sub board. Align the rf coaxial cable to the chassis as the indicated position..

  • Page 41

    Z530 service guide level1~2 41 version 1.0 stick the adhesive double side tape to the main antenna. As the indicated position. Remove the protect file then assemble the speaker to the main antenna. Stick the speaker mesh to the main antenna..

  • Page 42

    Z530 service guide level1~2 42 version 1.0 assemble the main antenna to the housing. Assemble the power key button to the housing. Assemble the volume key button to the housing..

  • Page 43

    Z530 service guide level1~2 43 version 1.0 press the housing firmly. Fasten 7 screws at the location indicated. And follow the sequence when fasten the screws. Torque 0.5 ± 0.1 kgf-cm note: location no.1 must use 2700000121w for japan sku insert the battery into the device. 1 2 3 4 5 6 7.

  • Page 44

    Z530 service guide level1~2 44 version 1.0 press the battery cover down to lock the device. (you will hear a click when the back cover is locked in place) the assembling process is done required tools and screws cei p/n qty-per description specification 2700000209w 7 screw cross ma1.6 y l3.4 blk swr...

  • Page 45

    Z530 service guide level1~2 45 version 1.0 diagnostics sop for diagnostics tool & sop, please refer to ads (acer diagnostic system) for detail explode diagram.

  • Page 46

    Z530 service guide level1~2 46 version 1.0 spare part list.

  • Page 47

    Z530 service guide level1~2 47 version 1.0

  • Page 48

    Z530 service guide level1~2 48 version 1.0

  • Page 49

    Z530 service guide level1~2 49 version 1.0