Aircalo CASSETTE BALI Installation And Maintenance Manual - page 3
2
1. GENERALITES
CAUTION: before any intervention on the system and before handling any intern component, cut the power of the
main circuit-breaker.
Read attentively this manual before starting the installation
The unit is in conformity with the Low Voltage Directive (CEE/73/23) and electromagnetic compatibility
(CEE/89/336).
Confide the installation to a qualified installer.
The maintenance must be made only by qualified personnel.
Respect safety requirements of national standards. In particular, check that you dispose of a connection
on the ground with an adequate size.
Check that the tension and the frequency of the power supply is like the ones necessary at the unit
which will be installed.
Eventually, take into account of others devices connected up at the same electric circuit.
Make sure that the safety requirements of national standards have been respected over the power
supply circuit
Use this unit only as a part of registered applications: they do not have to be used in a laundry room or
any other local with steam ironing.
It should be avoiding the use of Cassettes in an atmosphere that contains oil vapors or corrosive.
It is recommended to disinfect once by year, condensate drain pan to avoid the development and
spreading of legionella.
Keep the device away from frost.
Do not install or use damaged devices.
The manufacturer declines any responsibility for damage caused by the modification or mistake in
electric connections or hydraulic connections.
Failing to follow the electric security rules can cause a risk of fire in the case of an electric short.
In case of an unusual functioning, turn off the unit, remove the electricity supply and contact specialized
personnel.
Unless particular conditions, Aircalo gives one year parts warranty against defects in conception or
production. Are excluded defects of installation and use and also wearing parts and environment
condition which damage the smooth functioning of the device that would have not be specified in the
order.
Failing to follow the manufacturer instructions concerning the installation or the use of the unit in
conditions that exceed functioning limits indicated in this manual can lead to the loss of the unit warranty.