Aircon Off SMART REMOTE User manual - page 3

Direct Code Set Up

 How to Pair the Smart Remote with your Air Conditioner 

The code list on page 7 lists brands of air conditioners with the associated Smart Remote 

brand codes.  

These brand codes are Aircon Off numbers and are not the linked to the model numbers 

that may be printed on the air conditioner or its associated paperwork.  

The Smart Remote Brand Code List is indicative only and many air conditioner brands are 

not specifically listed. If your brand is not listed or if the listed codes are not successful with 

your AC, then use the Auto Search Function to find a matching code. 

Direct Code Set Up

1. From the Code Table, select the correct codes for your brand. 

Note: There are often many possible codes. Start with the first code, if this does not 

operate your air conditioner, try the second code and so on until you find the right code. 

For example: ALPIN, first try 0252, if this does not work, then try 0253, then 0764 etc. 

2. If necessary unlock the Set Up Function. 

3. Press the "SELECT" key, the Model Code display will flash on the LCD. Using the 

keypad enter the selected 4 digit code. Press each digit in turn. Eg: To enter "0252", first 

press the "0" key, then the "2" key, then the "5" key, and then finally press the last number 

"2". The Smart Remote accepts the code automatically and you can use the numeric 

keypad normally after the code is accepted. To test a code use the Blue Power Button. If it 

turns the air conditioner “On”, try other function keys. If the air conditioner does not turn 

“On” or if other functions do not work correctly, then try another code. To input another 

code, press the "SELECT" key again and enter the new code. Repeat this until all 

functions work correctly, meaning you have set the correct code. 

Brand Code Auto-Search (How to use Smart Remote When Listed 

Codes Don’t Work or My Brand is Not Listed) 

Brand Code Auto Search Set Up: 

1. If necessary unlock the Set Up Function. 

2. Aim the Smart Remote at your air conditioner. Press and hold the "SELECT" key for 5 

seconds and then release. The Smart Remote will go into auto-search mode and will emit 

a continuous signal. The code numbers on the LCD display will flash and then steadily 

increase. Keep the remote pointing at the air conditioner. (If the code numbers start too 

high, use the TEMP+/- keys to scroll to the code that you want to start the Auto-Search 

from.) When the A/C receives a signal it recognises it will make a beep. 

When the AC beeps and turns on

Immediately press any key to stop the count on 

that code

. 

If you don’t stop the count in time, the air conditioner will have started 

but will not turn Off (see 3.) You will need to unlock the Set Up Function again and 

scroll back to the lower code number that activated the air conditioner.

3. Test the code fully by trying all normal function keys. If they do not work correctly 

with the air conditioner  you have not found a totally compatible code. Repeat steps 1 and 

2 until a completely correct code is found and the air conditioner operates normally.

3