Airfonix AFX-19AR050 User manual - page 23
EN
23
www.airfonix.com
Troubleshooting Guide
If you’re having trouble using the R and T Series, look for a solution here. Some issues may be caused by a
connected component. Refer also to the manuals for your other components. If you can’t resolve the issue
yourself, contact Airfonix Customer Service
at (888) 778-2446 or www.airfonix.com.
ISSUE
Check LED Status:
Go Through the Solutions:
The units do
not power ON.
POWER LED is not lit:
Make sure the supplied AC adaptor is plugged securely into the DC IN
•
jack on the bottom of the unit and into a working AC outlet.
Press the
•
POWER button to turn the units on.
POWER LED is lit red:
Either the transmitter and/or the receiver is in standby mode. Press the
•
POWER button on the transmitter to power ON. The POWER LED on the
receivers light green when linked with the transmitter.
No sound or
faint sound.
POWER LED is lit green:
LINK LED is lit green:
AUX LED is lit green:
Make sure connected audio source is plugged into a working AC outlet,
•
turned on, and working.
Make sure the correct source is selected on the transmitter. When the
•
unit is powered on, it will default to AUX and the AUX LED lights green.
Press the SOURCE button to switch to sources. The SPDIF LED lights
green indicating the source connected using the digital SPDIF input is
selected. The AUX LED lights green indicating the source connected
using one of the analog sources is selected, either using the L and
R RCA inputs (marked AUX) OR the Hi-Level In inputs OR the L and R
Balance In inputs is selected.
Check the volume level on your transmitter.
•
Check the speaker connections to the receivers. See pages 16-18 for
•
Connecting the Receivers.
If the connected speakers are active, make sure they are plugged into a
•
working AC outlet and powered on.
Make sure the codes are set correctly for your installation. See page 14
•
for Setting Zone Codes.
IMPORTANT: During normal operation the LINK LED lights green, the POWER LED lights green
and either the AUX LED or the SPDIF LED lights green. Check the status of all the LEDs when using
this Troubleshooting Guide to help you quickly solve your problem.
!
NOTE: you may only switch between an audio source connected to one
of the analog input sources (Hi-Level In, Balance In or AUX) and another
audio source connected to the digital input source (SPDIF). See pages
18-19 for Connecting the Transmitter.