1. DL manuals
  2. Airlink101
  3. Webcam
  4. AICN777W
  5. Quick Installation Manual

Airlink101 AICN777W Quick Installation Manual

Other manuals for AICN777W: User Manual
Manual is about: Wireless MPEG4 Night Vision Pan/Tilt Network Camera

Summary of AICN777W

  • Page 1

    Quick installation guide skyipcam777w wireless mpeg4 night vision pan & tilt network camera model # aicn777w ver. 1a.

  • Page 2: Getting Started

    This quick installation guide only provides basic instructions. For detailed information on using this product, please refer to the user’s manual on the supplied cd. Getting started step 1 connect one end of the ethernet cable to the ip camera and connect the other end to one of the lan ports on you...

  • Page 3: Step 1

    Installing the skyipcam utility step 1 insert the provided cd and wait for the auto-run screen to appear. Step 2 click on install skyipcam utility. Note: if the auto-run screen does not appear automatically, go to start, run, type: d:\ utility\setup.Exe (where d is the letter of your cd drive) and c...

  • Page 4: Step 3

    Step 3 follow the installer instruction by clicking next on the following screens. Step 4 click close to complete the installation..

  • Page 5: Using The Skyipcam Utility

    Using the skyipcam utility step 1 go to start > (all) programs > airlink101 > airlink101 skyipcam utiliy step 2 select the ip camera you want to configure from the list and click on the change ip button. Note: if the camera’s ip address does not show up in the window, make sure the camera is properl...

  • Page 6: Step 3

    Step 3 you may accept the suggested static ip, or you can manually change the last 3-digit number of the ip address, in case the suggested address is already being used by another device in the same network. Alternatively, if your router’s dhcp server is enabled, you can select dhcp, and the router ...

  • Page 7: Step 5

    Step 5 when you are prompted for the username and password, enter “admin” for both user name and password, and click ok. Step 6 the camera viewing window will appear. Click on setup, and then click on smart wizard..

  • Page 8: Step 7

    Step 7 if desired, you may change the default camera name and enter a name for the location. Then enter “admin” for both admin password and confirm password. Click next. Step 8 you can change the camera’s ip settings in the below window. If you have done this in step 3, click next to go to the next ...

  • Page 9: Step 9

    Step 9 if you would like to set up email alerts that you can receive in the future, enter your email information here. You can get this information from your email service provider. You can also set this up at a later time. Click next. Step 10 if you would like to connect the camera wirelessly to th...

  • Page 10: Step 11

    Step 11 confirm your settings at the last window. If everything is correct, click apply and the configuration is completed. You can now disconnect the rj-45 cable from the camera to access the camera wirelessly..

  • Page 11: Viewing Images

    Viewing images method 1 --- access from “web browser” step 1 if you know the ip address of your network camera, you may open the web browser on your computer. Step 2 type the ip address of your camera (the default ip is 192.168.1.240) in the address bar, and then press [enter]. Step 3 enter “admin” ...

  • Page 12: Step 4

    Step 4 if it is the first time for your computer to access the web based viewing page, you may be prompted to install the activex control. Click on the bar at the top of the screen and click on install activex control. Step 5 click on install. Once the installation is completed, you may be able to v...

  • Page 13: Step 6

    Step 6 for clearer images, you may simply rotate the camera’s lens clockwise or counter-clockwise to adjust the focus..

  • Page 14: Note:

    Note: if you are not able to find the pictures or video clips saved by “snapshot’ or “manual record” under windows vista, you may also need to disable internet explorer’s protected mode: open internet explorer and click tools. Then click internet options. Select the security tab, uncheck the box for...

  • Page 15: Step 1

    Method 2 --- access from “skyipcam utility” step 1 go to start > (all) programs > airlink101 > airlink101 skyipcam utiliy, and open the airlink101 skyipcam utility. Step 2 select your camera from the list and click link step 3 follow step 3 to step 6 mentioned in method 1..

  • Page 16: Technical Support

    Technical support e-mail: support@airlink101.Com toll free: 1-888-746-3238 website: www.Airlink101.Com *theoretical maximum wireless signal rate based on ieee standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network ...