Airlink101 ATVPCI883 Quick Installation Manual - page 3
Section 2
Installing the TV Card
Note:
Be sure to turn off your computer before installing the TV card. Refer to the dia-
gram below as you follow the installation procedures.
Step 1
Insert the TV card into an available PCI slot on your computer. Secure the
bracket of the card to the computer with screws.
Step 2
Connect the coaxial cable (TV cable/antenna, not included) to the TV port
of the TV card.
Step 3
Connect one end of the A/V converter cable to the A/V port of the TV card.
Connect the Composite (or S-Video input), and audio inputs to the corresponding
output cables of your video/audio source.
Step 4
Connect one end of the provided Audio Cable to the Audio Out connector of
the A/V converter cable, and connect the other end of the Audio Cable to the Line
In port of your sound card.
Step 5
Connect the FM Radio Antenna to the FM port of the TV card.
Step 6
Connect the Remote Sensor to the Remote port of the TV card.
Note: Please connect the remote sensor cable to the card before powering ON
your PC; otherwise the remote control will not work.
Step 7
Connect your speakers to the Audio Out/Line Out port of your sound card.