Airlink101 Redwing CDMA Quick Start Manual - page 4
September 2006
3
Redwing CDMA for Bell Mobility - Quick Start, version 2.40
To configure or provision your modem to work on the Bell Mobility network, you will need device
activation information provided by Bell Mobility. Fill in the requested information and Click Next.
Once you have entered all the requested settings, the modem will check your signal strength, RSSI.
Click Next to begin “provisioning” and setting the configuration into memory. The process may
take a few minutes. Progress information will display across the bottom.
4.
Activate the Redwing
•
MSL (also known as the Master Subsidy LockCode, MSL or OTKSL, Activation Code, or
NAM Lock Code) is the code needed to enter data into the Redwing.
Caution:
If this is not set to the correct Master Code for your Redwing, the PRL
Update will fail.
C3110 only.
•
Mobile Identification Number (MIN), the ten digit number assigned to your account.
•
Network Access Identifier (NAI) and Password. The fields for NAI and @ should be filled in
for you. Verify they are correct and enter the password you have been given for your account.
If you have an account with a static IP address, use the drop down menu for the @ field to
select static.1x.bell.ca.