Airlink101 Redwing CDMA Quick Start Manual - page 7
September 2006
6
Redwing CDMA for Bell Mobility - Quick Start, version 2.40
When the driver is installed, you will return to the AirLink Modem Installation screen. The Air-
Link modem should now be listed (in addition to any other modem installed).
Select Next to begin installing the DUN connection.
From the drop down menu, select the AirLink modem. The defaults for the phone number, user
name and password will already be entered. Select Next to begin the install.
At the completion of the DUN installation, you will return to the Dial-up Networking Connection
screen. The AirLink modem should now be listed as a connection.
Your modem is now ready to be used as a DUN device for any applications on your computer
needing a network connection. If you have DUN installed for more than one modem, you will
need to specify in your application which DUN to use. Unless it is the only DUN, your AirLink
modem may not be the one your computer sees as a default.
Your AirLink Redwing should be mounted in a position that allows easy access for the cables so
they are not bent or constricted. The LEDs on the front panel should be visible for ease of opera-
tional verification. You should ensure that there is adequate airflow around the modem but that it is
kept free from direct exposure to the elements (sun, rain, etc.)
If you already have a DUN connection installed for
a different modem, it will be listed on the Dial-up
Networking Connection screen.
Select Add to create a new connection for the Air-
Link modem.
Hardware Installation
An optional accessory for your modem is a mounting kit. The bracket is designed to snugly cra-
dle the modem and hold it in place where you need it.
Connecting the Antenna
Your AirLink Redwing will work with most Dual-Band PCS cellular antennas with a TNC con-
nector that works in the high and low frequencies of CDMA . Connect the antenna or RF cable
directly to the TNC connector on the back of the Redwing.