Quick installation guide model # apsusb201 ver. 1a.
Section 1 warning: before beginning the installation, make sure that the printer driver is installed locally on each computer that will print through the print server. Otherwise, the print server will not be configured successfully. Please refer to your printer’s manual for instructions on how to in...
Step 1 connect one end of the ethernet cable to the rj-45 port of the print server and attach the other end of the cable to a router. Step 2 make sure all the printers are powered off, then connect one end of the usb cable to the usb port of the print server and attach the other end of the cable to ...
Section 3 installing software step 1 insert the provided cd and wait for the setup menu to appear. Step 2 click on install utility. Note: if the setup menu does not appear automatically after you have inserted the cd, go to start, run, type d:\ps utility\setup.Exe (where d is the letter of your cd d...
Step 4 click next. Step 5 click yes. Step 6 click finish..
Section 4 running ps utility note: if your tcp/ip setting from section 1 has an ip address of 192.168.1.X (where x is a number between 2 - 253) and your default gateway is 192.168.1.1, you may skip this section and proceed to section 5, verifying network connection. If either criteria does not match...
Step 4 refer back to the tcp/ip setting from section 1. Note the first three sets of numbers from the ip address you wrote down and enter them into the respective fields. For example: if your computer’s ip address is 192.168.0 .100, enter the same three numbers: 192.168.0 in the corresponding fields...
Verifying network connection step 1 click on start, run. Step 2 for windows 95/98/me type command and click ok. For windows 2000/xp, type cmd and click ok. Step 3 at the command prompt, type ping and the ip address of the print server and press enter. For example, if you have changed the ip address ...
Section 6 running ps wizard warning: make sure you have installed the printer driver locally on every computer in your network before running the ps wizard. Otherwise, the ps wizard will not run properly. Be sure to run the ps wizard on all the computers in your network. Step 1 insert the provided c...
Section 4 step 3 click next. Step 4 select the printer that is connected to the print server and click next..
Step 5 double-click on the print server name, select the printer port name, and click next. Step 6 click reboot (for windows 95/98/me) or finish (for windows 2000/xp). Step 7 run the ps wizard on all the computers in your network that will use the print server. You have successfully configured the p...
Section 8 technical support e-mail: support@airlinkplus.Com toll free: 1-888-746-3238 web site: www.Airlinkplus.Com note: this print server does not support most multi-functional printers (i.E. Printers with scanner, fax, copier, etc. Functions). If your printer is a multi-functional printer it may ...
