1. DL manuals
  2. AirLive
  3. VoIP
  4. VOIP-111A
  5. User Manual

AirLive VOIP-111A User Manual

Other manuals for VOIP-111A: User Manual
Manual is about: SIP VoIP ATA Adapter

Summary of VOIP-111A

  • Page 1

    Voip-111a/voip-120a sip voip ata adapter user’s manual.

  • Page 2: Copyright & Disclaimer

    Copyright and disclaimer airlive voip-111a/voip-120a user’s manual i copyright & disclaimer no part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of ovislink corp. Ovislink corp. Has made the ...

  • Page 3: Fcc Certifications

    Copyright and disclaimer airlive voip-111a/voip-120a user’s manual ii fcc certifications this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful i...

  • Page 4: Table Of Contents

    Table of contents airlive voip-111a/voip-120a user’s manual 1 table of contents 1. Introduction .............................................................................................. 1 1.1 introduction ........................................................................................ 1...

  • Page 5

    Table of contents airlive voip-111a/voip-120a user’s manual 2 3.6 management (advanced configuration) ........................................... 45 3.6.1 view log ............................................................................................... 46 3.6.2 auto provision ...................

  • Page 6: Introduction

    1. Introduction airlive voip-111a/voip-120a user’s manual 1 1 1. Introduction 1.1 introduction this user’s manual is for voip-111a (1pstn+1phone) / voip-120a (2phone) terminal adapter (ata). This user’s manual explains the ivr instruction, web configuration, and command line configuration for the at...

  • Page 7: 1.3 Features

    1. Introduction airlive voip-111a/voip-120a user’s manual 2 since 2009, airlive has added the “newsletter instant support system” on our website. Airlive newsletter subscribers receives instant email notifications when there are new download or tech support faq updates for their subscribed airlive m...

  • Page 8

    1. Introduction airlive voip-111a/voip-120a user’s manual 3 Ÿ two rj-11 analog telephone jacks interfaces you can connect one analog telephone to the terminal adapter and one pstn line (voip-111a). Or, two analog telephone sets at voip-120a. Ÿ led indication there are three led indicators on the ata...

  • Page 9

    1. Introduction airlive voip-111a/voip-120a user’s manual 4 · in-band dtmf · out-of band dtmf · sip info · firmware upgrade sip server · registrar server (five sip accounts) · outbound proxy · tftp · http.

  • Page 10: Keypad Interface From

    2. Keypad interface from analog phone set of ata airlive voip-111a/voip-120a user’s manual 5 2 2. Keypad interface from analog phone set of ata you can use analog phone set’s keypad to operate, configure and listen to configuration (ivr play voice messages in english) at ata without using web interf...

  • Page 11

    2. Keypad interface from analog phone set of ata airlive voip-111a/voip-120a user’s manual 6 function enable call waiting #138# none system will automatically reboot and call waiting will be enabled. Function disable call waiting #139# none system will automatically reboot and call waiting will be d...

  • Page 12

    2. Keypad interface from analog phone set of ata airlive voip-111a/voip-120a user’s manual 7 setting set static ip address #112xxx*xxx *xxx*xxx# enter ip address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Dhcp will be disabled and system will change to...

  • Page 13

    2. Keypad interface from analog phone set of ata airlive voip-111a/voip-120a user’s manual 8 setting set auto configuration mode #137x# select the auto configuration mode, in the x field, you can press the following; 0:off, 1:tftp, 2:ftp you can set the auto configuration method you want, default is...

  • Page 14: 3.1 Login Web Management

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 9 the voip-111a/voip-120a provide a built-in web browser as management interface. In this chapter, we will explain voip-111a/voip-120a’s web management and how to get into it. 3.1 login web management the voip-111a/voi...

  • Page 15

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 10 3.1.1 default setting the following information will help you to get start quickly. However, we recommend you to read through the entire manual before you start. Please note the password and ssid are case sensitive....

  • Page 16: 3.2 Phone

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 11 item description status current device information list phone phone item provides phone book, dial plan, call service, general setting, volume settings network network item provides wan, ddns, vlan, vpn (pptp/l2tp),...

  • Page 17

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 12 item description page default setting is 1. Select the page from page1 to page14. Index show index number with 140 entries in total from phone 0 to 139. Name it is speed dial number in speed dial mode. The name fiel...

  • Page 18

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 13 example: in [phone book setting] page, set [index 1], name: 301, url: 301@192.168.1.2 . Set [index 2], name: 206, number: 1747643364. Set [index 3], name: test, number: 8123478944566. Ex1: pick up phone and dial ″ 3...

  • Page 19

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 14 dial now rule automatic dialing. When the dialing rule match contents in this row, the automatic dialing function will be executed without waiting for "press #" and “auto dial time” to dial out. Both numbers and sym...

  • Page 20

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 15 and the call will dial out through pstn line. Maximum length is 7 digits. It only allows to enter number, * and # digits. Submit save the configuration. Reset clear the configuration. Example 1: drop prefix and dial...

  • Page 21

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 16 when the dialing number is like [12xxxx], it matched [rule] -> [12], ata will add [prefix] [009] in front of [12]. The actual dialing number will be [009+12xxxx]. Instruction 4: when the dialing number is [53789], i...

  • Page 22

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 17 this figure is for voip-111a field description forward type of phone1 default is disable. To configure phone 1 forward type. Here provides 5 options: disable always, busy, no answer, busy or no answer. *note: please...

  • Page 23

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 18 dnd type of phone 1 configure phone 1 dnd function, default is disable. When you set to enable, ata will response sip command 486 message (busy status) to calling user once an call incoming. There are 3 options to c...

  • Page 24

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 19 this figure is for voip-120a field description forward type of phone1 default is disable. To configure phone 1 forward type. Here provides 5 options: disable always, busy, no answer, busy or no answer. *note: please...

  • Page 25

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 20 delay of phone 2 when you pick up the phone before dialing, ata start to count time until the first digit was dialed. Default delay time is 3 seconds. Ata will use hotline number to dial if configured time was expir...

  • Page 26

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 21 step2: route an incoming call to desire routes to dial according to configuration contents of [forward type] and [forward number]. (2) busy (busy transfer): step1: go to [call service setting] page and configure [fo...

  • Page 27

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 22 step2: dial number according to configuration contents of [hotline number] when ata pickup handset and wait for [delay] time was expired before dialing any digits. (2) dial an ip address: step1: go to [call service ...

  • Page 28

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 23 3.2.4 general provide caller id, call waiting, auto answer and t.38 fax transmission. Field description call waiting enable/disable call waiting function. This feature allows you to answer the incoming call when you...

  • Page 29: 3.3 Network

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 24 3.2.5 volume this function is to adjust volume of microphone and speaker at analog phone set, and fxo port’s volume as well. Field description handset volume default is 10. Control the volume of the handset receiver...

  • Page 30

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 25 field description type default is dhcp client and provides static ip address, dhcp (gains ip address automatically) and pppoe: adsl dialing method. Ip address current ip address list or any ip address (ipv4 format)....

  • Page 31

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 26 field description active default is disable; the ddns function will be enabled when you set to enable. Host name enter host name which can be ip address or domain name. Format: xxx.Xxx.Xxx.Xxx. Length is 63 digits. ...

  • Page 32

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 27 3.3.3 vlan provide network, sip and rtp vlan function. This feature needs to work with vlan router. Field description network (both wan & lan) configure vlan function of both wan and lan ports. Vlan packets default ...

  • Page 33

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 28 field description cfi default: 0. To set canonical format indicator (cfi) for one byte. Data range is (0~1). Rtp vid default is 0 (disable). Define sip vlan id. Range is 3~4094. This feature is an independent one wh...

  • Page 34

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 29 3.3.5 ntp provide time synchronization and daylight saving function. Field description ntp active default is auto. This feature is to auto/manual time sync feature. When it was set to disable, you may configure time...

  • Page 35: 3.4 Nat

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 30 field description dst end date configure the daylight saving start time option: day of month, week of month. Submit [button] save the configuration. Reset [button] clear the configuration. 3.4 nat provide lan, dmz &...

  • Page 36

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 31 3.4.2 dmz & mac clone provide dmz and mac clone configuration. Field description dmz type default is disable. When set to enable, all network packages will be sent to the ip address which was defined from [assigned ...

  • Page 37

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 32 field description index index number to support 12 sets configuration. Enable default is disable to all sets. When setting enable, this function will be started. Protocol default is tcp. Protocol option is: tcp or u...

  • Page 38: 3.5   Sip

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 33 3.5 sip provide service, codes, advanced and stun functions. 3.5.1 service provide 5 register accounts. This figure is for voip-111a field description realm no. Default is 1 (the first register account). If you want...

  • Page 39

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 34 proxy server enter proxy server information. It can be ip address or domain name. Format: xxx.Xxx.Xxx.Xxx. Maximum length is 63 digits. If special port address is needed, please add it behind. For instance: nat.Voip...

  • Page 40

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 35 field description id length: 47 digits. Authentication password account’s register password which can be numbers or strings. Maximum length: 31 digits. Domain server enter domain server which can be ip address or do...

  • Page 41

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 36 3.5.2 codes provide voice codec priority, rtp payload type and codec id setting. Field description disabled codes default is g.726.16, g.726.24, g.726.32, g.726.40, ilbc. Provide disable codec item here. >> >>: move...

  • Page 42

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 37 field description options are: 30, 60, 90 ms. G.723 5.3k default is disable. Define g.723 5.3k function. When it was selected to enable the 5.3k function. Provide option: disable, enable. Silence suppression (vad) d...

  • Page 43

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 38 this figure is for voip-111a field description sip expire time default is 60. The range is 60~86400 seconds. When it was set tp 0, ata define expired time according to sip server. Data length is 5 digits. Sip expire...

  • Page 44

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 39 sip t1 default is 500 ms. Configure round-trip time (rtp) estimate. T1 determines several timers as defined in rfc3261. For example, when an unreliable transport protocol is used, a client invite transaction retrans...

  • Page 45

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 40 sip qos (diff-serv) default is 40; define sip qos (diff-ser) function. Range: 0~63. Use dns srv default is disable. When you enable the dns srv, ata will run [dns, standard query srv_sip_upd.Xxx.Xxx.Xxx]. Send keep ...

  • Page 46

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 41 this figure is for voip-120a field description sip expire time default is 60. The range is 60~86400 seconds. When it was set tp 0, ata define expired time according to sip server. Data length is 5 digits..

  • Page 47

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 42 sip expire time mode default is general. Option is: general, 1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10. This feature must be compatible with sip server. Calculate method: general: expire time-[(expire time/30)x6]...

  • Page 48

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 43 rtp port range of phone 1 default is 20000~20000; define phone 1 rtp port start and stop. Range: 1024~40000. *note: 1-both fields can be same or a range. 2-rtp port was used by two continuous ports. If rtp port was ...

  • Page 49

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 44 keep alives period default is 60 seconds. Define the keep alive sending time period. Range: 15~250 seconds. Jitter buffer default is 1; range: 0~32. A jitter buffer temporarily stores arriving voice packets in order...

  • Page 50

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 45 stun port number default port is 3478; define stun port. Range: 80~65535. Data length is 5 digits. Force active default is disable. When this feature was enabled, ata change sip messge to ip. Option: disable, enable...

  • Page 51

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 46 3.6.1 view log field description page default is 1(page 1). Index information id. Content include time and information. Get time from sntp server, succeed! : event time and date. Get time from sntp server, succeed!:...

  • Page 52

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 47 3.6.2 auto provision provide 3 kinds of provision methods. (tftp, ftp and http) field description type default is disable; define auto configure method. When it was enabled, ata visit assigned server to download “ma...

  • Page 53

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 48 field description tftp file path tftp configuration files localtion. It can be numbers or strings. Maximum length: 63 digits. For instance: 123/ to setup file folder. An “/” has to enter behind. Http server define t...

  • Page 54

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 49 field description type default is disable ; define version upgrade method. Option: disable, tftp, ftp or http mode. Tftp server set up tftp server ip address which can be ip address or domain name. Format: xxx.Xxx.X...

  • Page 55

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 50 1. You will hear “dududu” alert tone from handset when you pickup handset after updated firmware was available. If you give up update firmware procedure here, you don’t hear any alert tone at next time. 2. If you wa...

  • Page 56

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 51 field description icmp not echo default is disable. When icmp was set to enable, ata doesn’t response ping command. Option: disable, enable send anonymous cid default is disable. When ata was set to type 1 or type 2...

  • Page 57

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 52 stop feature tone default is disable. This feature is to provide alert tone at the following messages. Enable: if you enable [subscribe for mwi, forward, dnd] function, you will hear the alert tone (dududu…..) when ...

  • Page 58

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 53 system log type default is disable; define syslog type or log message type. Option: disable, call statistics, general debug, call statistics + general debug, sip debug, call statistics + sip debug, general debug + s...

  • Page 59

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 54 field description admin administrator (the highest level): ata only provide one administrator account. This level can configure all setting pages such as: [phone: phone book, dial plan, call service, general, volume...

  • Page 60

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 55 3.6.7 tone tone setting provides dial, ring back, busy, congestion, ring, call waiting tone and multi-frequency configuration. Field description dial tone dial tone configuration. Cadence on default is disable. Hi-t...

  • Page 61

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 56 on time 3 default is 0; the unit is 10ms; only numerals are acceptable. Data range: 0~ 999, maximum length: 3 bytes. Off time 3 default is 0; the unit is 10ms; only numerals are acceptable. Data range: 0~ 999, maxim...

  • Page 62

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 57 off time 3 default is 0; the unit is 10ms; only numerals are acceptable. Data range: 0~ 999, maximum length: 3 bytes. Congestion congestion tone configuration candence on default is enable. Hi-tone freq default: 440...

  • Page 63

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 58 call waiting call waiting tone configuration. Candence on default is enable hi-tone freq default: 440; only numerals are acceptable. Data range: (0~4096). Maximum length: 4 bytes. Lo-tone freq default: 350; only num...

  • Page 64: 3.7 Save & Reboot

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 59 3.6.9 language provide language option for web configuration, ata will auto reboot after press [submit]. Don’t remove power adaptor at this moment. Field description choice language default is english. Ata has to re...

  • Page 65: 3.8 Logout

    3. Configuring the sip voip ata adapter airlive voip-111a/voip-120a user’s manual 60 3.8 logout 3.8.1 logout logout system and return to login page. Field description logout logout system and return to login page..