Airlogic ABM-200 Application Note - page 6
of
8
Bluetooth™ Module Application Note
Copyright © 2004 AirLogic Co., Ltd.
All specification are preliminary and AirLogic reserves the right to change these without notice.
http://www.airlogic.co.kr
12. RESET
ABM-200-1xxx may be reset from several source : RESET_IN pin, power on reset, a
UART break character or via a software configured watchdog timer.
The RESET_IN pin is an active high reset and is internally filtered using the internal
low frequency clock oscillator. A reset will be performed between 1.5 and 4.0ms
following RESET_IN being active. It is recommended that RESET_IN is applied for a
period greater than 5ms.