Airnet AIR-AP600GHP Quick installation manual - Common
Common
Configurations
4
Quick
Installation
Guide
12
www.netkrom.com
You can implement a Point-to-Point connection by simply setting one
access point as Access Point Mode and setting the other access point in
Station mode (client).
Point to Point Application
Click on the Basic Wireless Tab.
In wireless mode choose Access Point.
Enter a name for the Local AP-ESSID.
Choose the wireless profile
NA: 5GHz, mix of a and n
NG: 2.4GHz, mix of b, g and n
Save the changes and reboot the device to let your changes take effect.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
Click on the Basic Wireless Tab.
In wireless mode choose Station.
Enter the name of the Remote AP-ESSID.
Note: this option must match with the ESSID configured in the Access point.
Enter the Access Point’s MAC in Remote AP-Lock to MAC.
Choose the wireless profile
NA: 5GHz, mix of a and n
NG: 2.4GHz, mix of a, b and n
Note: this option must match with the wireless profile configured in the Access point.
Save the changes and reboot the device to let your changes take effect.
Follow these steps to setup Access Point Mode.
Follow these steps to setup Station Mode.
Repeat the Station steps to add more Clients to the Point-to-Multipoint connection.
300 Mbps
AIR-AP600GHP
High Capacity Wireless Networks