Airnet AIR-RT150GNH Quick Start Manual - 2. Login To The Router
h. When all of the devices boot up completely, make sure that the router's LEDs
light as follows:
• Power LED: Light up
• System LED: Flash
• Link/Act LEDs (WAN&LAN): Light up
• WLAN LED: Flash
2. Login to the Router
To login to the router, you should set up the TCP/IP Protocol in "Obtain an IP
address automatically" mode on your PC(s). For the detailed instructions,
please refer to Appendix B in the User Guide on the Resource CD.
a. To access the configuration utility, open a web-browser and type in the
default address http://192.168.1.1 in the address field of the browser.
b. After a moment, a login window will appear. Enter admin for the User Name
and Password, both in lower case letters. Then click OK or press Enter.
3. Connecting to the Internet
a. After successfully login, you can configure the router using the web browser.
Please click the Quick Setup link on the left of the main menu and the Quick
Setup screen will appear. Click Next to continue.