Airnet AIR-RT150GNH Quick Start Manual - 4. Wps Configuration
e. Click the Next button. You will then see the Finish page.
If you don’t make any changes on the Wireless page, you will see the Finish
page as shown below. Click the Finish button to finish the Quick Setup.
If there is something changed on the Wireless page, you will see the Finish
page as shown below. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.
4. WPS Configuration
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to
an existing network quickly.
Note:
1) To build a successful connection between the router and the wireless device
by WPS, the wireless device should support and do the corresponding
configuration for WPS meanwhile.
2) You can establish a wireless connection by using either Push WPS/Reset
button (for less than 5 seconds) method or PIN method. It is recommended
that you choose the simplest method that your AP device supports.
3) Here takes the Wireless Adapter of our company for example.
I.
WPS/Reset Button Method
If the wireless adapter is equipped with a push-button for WPS:
Step1: Press the WPS/Reset button on your router.