Airone RIGOLETTO 60 Instructions For Using Maintaining And Installing The Hood - page 3
CONTROLS
SLIDER CONTROL (Fig. 1)
There are two slider switches on the slider control version.
> One for turning the lights on and off.
> One for turning the motor on and off and for selecting 1^, 2^ or 3^ speed.
KEYBOARD CONTROLS (Fig. 2)
There are four buttons on the keyboard control version:
> One for turning the lights on and off.
> One for turning the motor on at 1st speed and for turning it off.
> One for turning it on at 2nd speed.
> One for turning it on at 3rd speed.
SOFT TOUCH CONTROL (Fig. 3)
There are four soft touch buttons on this version and a variable colour led (green min. speed, red max. speed).
> One button for turning the lights on and off.
> One button for turning on at 2nd speed and for turning the motor off.
N.B. If this button is kept depressed for more than three seconds, the automatic function is activated to turn the hood off function after 10
minutes.
> Two buttons + and - for increasing and reducing the motor speed.
DIGITAL CONTROLS (Fig. 4)
In this version there are five soft touch buttons and a display
> One button for turning the lights on and off.
> One button for turning on at 2nd speed and for turning the motor off.
> Two buttons + and - for increasing and decreasing the motor speed.
> A TIMER button for turning the motor off after 10 minutes.
When the timer is activated, the number on the display flashes.
Special functions:
After 100 hours use, a 0 or a letter A will start flashing on the DISPLAY to remind the user to clean the metal filters.
After washing the metal filters, reset the hour meter by pressing the TIMER button for more than three seconds with the hood turned off.
When the hour meter has been reset a dash appears on the display, with the hood turned off.
ROTARY CONTROL (Fig.5)
In the rotary control version there are three knobs:
> One knob for switching light decorative on and off
> One knob for switching lights on and off
> One knob for speed selection (1°,2°,3°,4°) and turning the motor off.
RADIO- CONTROL (Fig. 6)
The button ON/OFF on the hood turn on simultaneously lights and the motor at the second speed or it turns off everything.
After 100 working hours of the suction motor the red led will start to flash indicating the need to wash metals filters. To cancel the filters
alarm, when the suction motor is switched off, you must press button ON/OFF long enough.
Radio control:
At the first use it is necessary to start remote control learning. With the hood turned off, keep button “+” for a long time. The remote
control learning is indicated with the flashing alarm filters led. If within one minute arrive a valid remote control code (sent by pressing
any button of the remote control ) the led will be on continuously for 3 seconds and then it will turn off, indicating the proper learning.