Aironet PC4810B Quick Start Manual - page 9
4800B Series PC Card Wireless LAN Adapter
Quick-Start Guide
7
16.
Select SSID. Type your Access Point’s SSID in the
Value dialog box. Click OK.
17.
In the Network window, click OK.
The driver installation is complete.
Installing in Windows NT 4.0
1.
Remove all PC Cards from your computer and turn it
on.
2.
Hold the Aironet 4800B Series PC Card Wireless LAN
Adapter with the label facing up. Insert the card into the
PC card slot and apply just enough pressure to make
sure it is fully seated.
Note: The PC Card slot will be on the left or right side
of the computer, depending on the model.
Caution: Do not force the PC Card into the slot or you
may bend the pins inside the slot.
3.
Insert the Aironet 4800 Series for Windows 95 & NT
4.0 CD into your CD-ROM drive.
Note: If your computer doesn’t have a CD-ROM drive,
go to the Aironet website (
www.aironet.com
) and
download the drivers for your computer’s operating
system. Copy the drivers to a 3.5” floppy disk and use
the floppy disk in place of the CD.
4.
Right-click on the Network Neighborhood icon on your
desktop and select Properties. (If your desktop doesn’t
have a Network Neighborhood icon, open the Control
Panel, right-click the Network icon there, and select
Properties.)