[ operation manual ] updated: 15/07/15.
Elements: ds-lfo welcome! Thank you for purchasing elements: ds-lfo. Featuring dual stereo lfos from our popular multiband series, ds-lfo is a powerful stereo control signal generator, which integrates seamlessly into our elements modular series. Used either as a standalone device or as part of a mo...
Elements: ds-lfo contents loading and saving patches loading and saving patches in s-delay is done in the same way as with any other reason device. See “loading patches” and “saving patches” in the reason operation manual for further information. Controls and displays lfo 1 & 2 ds-lfo features two s...
Elements: ds-lfo inverse saw on the right) and inverse cross-saw (an inverse saw on the left and a regular saw on the right). Freq — controls the frequency of the lfo. Values range from 0.05hz to 15hz (unsynced), and 1/32 to 8/1 (synced). Offset — offsets the phase of both the left and right lfo in ...
Elements: ds-lfo rear panel modulation in — cv modulation in ds-lfo works the same way as for any stock reason device. The parameters that can be modulated via cv are: the freq, phase/spin and offset parameters in each lfo section and the 1+2 mix and amp parameters in the global section. Modulation ...
