AirRaid Audio Elements DS-LFO Operation Manual - page 5
of
5
Elements: DS-LFO
REAR PANEL
Modulation In — CV modulation in DS-LFO works the same way as for any stock Reason
device. The parameters that can be modulated via CV are:
The Freq, Phase/Spin and Offset parameters in each LFO section and the 1+2 Mix and Amp
parameters in the Global section.
Modulation Out) — Each LFO has two separate pairs of stereo outputs, labelled ‘L/R A’ and
‘L/R B’ respectively. The output of each pair is identical. In addition, there are two ‘1+2’ pairs
of stereo outputs, which output a mix of both LFOs. The exact mix of each is defined by the
1+2 Mix knob on the front panel.
Page of
4
4