AirSep FreeStyle Patient Manual - page 10
MN123-1 rev B 01/10
6
When the automobile in which you are using the FreeStyle unit is turned off, disconnect and remove the unit from the
automobile with you. Never allow FreeStyle to be stored in a very hot automobile or in other similar, high-or low-
temperature environments. (Refer to the Specifications section in this manual.)
If the unit has been stored for an extended period of time in a cold environment (outside its normal operating range),
the unit should be allowed to warm up to ambient temperature before being turned on.
Federal (USA) law restricts this device to sale by order of a physician.
When using FreeStyle in an automobile, boat, or other vehicle with the DC power supply, make sure that the vehicle is
started and running before connecting the FreeStyle unit. If the DC power supply does not illuminate and requires
resetting, disconnect the DC power supply from the DC outlet, restart your vehicle, and then reconnect your DC power
supply into the DC outlet.
Although FreeStyle is a low-voltage device, do not remove its housing. Only your Equipment Provider should remove
the unit covers.
While using FreeStyle outside of its normal operating temperature range, there may be a decrease in battery
performance or an increase in charge time.