Animo CB 10 User Manual - page 19
2017/04 V.1
62
EN
Container (CNe/CNi)
4.7
Complete the coffee brewing process
1
Wait for the machine to make 1 short beep sound.
2
Do a check that the progress bar (A) on the display shows
that the brew is Dripping.
3
After approximately 5 minutes, wait for the machine to make
3 short beep sounds.
Note
•
If you have a CB model with a second container, you can start a new brewing process
while the first container completes the brewing process. When the water supply stops
coming out of the swivel arm over the first container, put the swivel arm over the second
container and start the brewing process again.
•
The container heating begins when the brewing process starts.
•
In a container, the coffee is kept at an average temperature between 80 to 85°C.
•
The coffee can be stored in the container for between 1 to 1.5 hours before the flavor of
the coffee deteriorates.
Caution
Stop the container heater if the container is empty. To stop the heater, disconnect the power
cable from the sockets on tower, or use the control panel of the machine.
WARNING
•
Beware of scalding injuries when you move the swivel arm.
•
Beware of burn injuries from the contents of the filter basket. The contents of the filter
basket will be hot when you remove it from the container after the brewing process is
complete. Make sure you have a safe, watertight receptacle to dispose of the contents of
the filter basket.
•
Beware of scalding injuries. Hot beverage is inside the container after the completion of
the brewing process. Hot beverage will come out of the tap if it is opened.
A