2015/03 Rev. 2.0
COMBI LINE
22
GB
5.
use
5.1
Brewing coffee
A basket filter is needed to brew coffee in the container.
A flow water heater / water boiler is needed to brew coffee in the container.
Figure 2
A - Filter lid with water distributor
B - Basket filter paper
C - Basket filter
D - Blender
E - Container and lid
1. The inner pot of the container must always be clean.
2. To avoid temperature loss during the brewing process we recommend
you to pre-heat the container, by putting the cable into the socket (CNe),
filling the container with approx. 2 litres of hot water and switching the
container on for at least 10 minutes before the brew starts.
3. Place a basket filter paper into the combi-filter with the appropriate
amount of coffee (normal/medium ground). The coffee must be evenly
spread over the filter. Generally speaking you will need about 45-50
grams per litre.
4. Tap the water from the container.
5. Place the coffee blender into the container.
6. Place the filter lid on the filter, put the basket filter on the container and
position the swivel arm over the centre of the lid.
7. Select the required quantity and let the flow water heater (CB) start.
8. The brewing proces is starting, the blender in the container quarantees
a uniform quality of the coffee, which makes decanting the coffee (with
loss of time, temperature and aroma) unnecessary. The coffee is kept
at a temperature of 80°-85°C. The storage time of the coffee is
determined by the blend of coffee and is usually 1 to 1,5 hours.
9. After the coffee has been made and the filter has drained, the latter can
be removed and the lid can be placed on the container.
10. Rinse the basket filter after use.
Attention! Always place the blender / transport disc and the lid when transporting the container
by hand or serving trolly. This prevents spilling from the container.
A
B
C
D
E
Fig. 2