1. DL manuals
  2. Animo
  3. Coffee Maker
  4. OptiBean
  5. Service Book

Animo OptiBean Service Book

Other manuals for OptiBean: User Manual
Manual is about: Model 2011

Summary of OptiBean

  • Page 1

    Optibean optibean xl service book feel like a barista. Model 2011.

  • Page 2

    2 optibean /optibean xl 2015/09 rev. 1.2 table of contents foreword ........................................................................................................................... 5 1. Introduction optibean ....................................................................................

  • Page 3

    3 2015/09 rev. 1.2 en optibean /optibean xl 3.5 grinder ......................................................................................................................... 33 3.5.1 basic adjustment ............................................................................................. 34...

  • Page 4

    4 optibean /optibean xl 2015/09 rev. 1.2 6.5 descaling instructions ................................................................................................... 73 6.6 maintenances espresso group ...................................................................................... 76 6.6.1 r...

  • Page 5

    5 2015/09 rev. 1.2 en optibean /optibean xl © 2015 animo® all rights reserved. No part of this document may be reproduced and/or made public in print, microfilm, electronic media or any other form without the manufacturer’s prior consent. This also applies to the corresponding diagrams and/or charts...

  • Page 6

    6 optibean /optibean xl 2015/09 rev. 1.2 1. Introduction optibean explanation optibean type designation: designation meaning description cup volume dispensing hight cup thermos jug 1e digit number canisters 1 - 3 - standard brewer 6,5-9,5 gram 50-150ml 60-115mm 167mm xl xl brewer 9,5-13,4 gram 150-2...

  • Page 7

    7 2015/09 rev. 1.2 en optibean /optibean xl 1.1 principles of operation dv 1 dv 2 mixer 2 unit1 unit 2 dv 1 dv 2 mixer 2 dv 4 hot water coffee topping coc oa topping coffee kw 3 cold water brewer optibean 2 (xl) optibean 3 (xl) dv 4 kw 3 brewer unit1 unit 2 hot water cold water unit1 unit 2 dv 1 dv ...

  • Page 8

    8 optibean /optibean xl 2015/09 rev. 1.2 1.2 model code the optibean models are standard executed according below canister configuration. Optibean (xl) model code canister configurations std. Xl 1 3 4 1 3 1 2b ba - coffee beans 2 3 1 2b 1a 2b 1l coffee beans topping 2b 3a 2b 3l cocoa 2b 4a 2b 4l tea...

  • Page 9

    9 2015/09 rev. 1.2 en optibean /optibean xl 2. First menu settings after installation the following data must be set in the operator and service menus immediately after the machine’s first use. The language factory setting is english. Switch on the machine ● follow the instructions on the display bo...

  • Page 10

    10 optibean /optibean xl 2015/09 rev. 1.2 water hardness table water quality hardness service moment after (cups) °d °f mmol/l mgcaco3/l very hard 18-30 32-55 3,2-5,3 321- 536 5,000 hard 12-18 22-32 2,2-3,2 214-321 12,500 average 8-12 15-22 1,4-2,2 268-214 20,000* soft 4-8 7-15 0,7-1,4 72-268 40,000...

  • Page 11

    11 2015/09 rev. 1.2 en optibean /optibean xl 2.1 how to program a recipe? Every machine contains pre-programmed basic recipes. Each key can be changed, if required. In below example button 1 will be change from coffee into cappuccino . 2.2 button settings │ └── 2.1.01 button 1 │ │ └─── recipe │ │ └─...

  • Page 12

    12 optibean /optibean xl 2015/09 rev. 1.2 2.2 how do you correct a recipe? Easy way to check the dispensed drink- volume and taste without leaving the menu! 2.1 quick recipe pro │ └── 2.1.01 coffee (recipe) │ └─── coffee coffee beans (ingredient) 2.1.04 cappuccino (recipe) │ └─── cappuccino │ cup vo...

  • Page 13

    13 2015/09 rev. 1.2 en optibean /optibean xl 2.3 how do you measure the weight of an ingredient only? Only the grinder / ingredient motor will be driven (no water is dispensed). It is strongly recommended to check the coffee measurement using a set of mini scales. These are simple to order via the i...

  • Page 14

    14 optibean /optibean xl 2015/09 rev. 1.2 Ø 37mm Ø 44mm standard min. 6,5 - max. 9,5* gram xl min. 9,5 - max 13,4* gram min. 50 ml max. 150 ml min. 150 ml max. 230 ml * max. 9,0 gram * max. 9,5 gram * max. 12,5 gram * max. 13,4 gram (1,8 fl oz) (5,3 fl oz) (5,3 fl oz) (8,1 fl oz) (0,23 oz) (0,34 oz)...

  • Page 15

    15 2015/09 rev. 1.2 en optibean /optibean xl 2.4.2 coffee waste (puck) • it is very important how the compressed puck looks like when it is thrown out of the brewer. A too wet puck falling apart is a sign too little coffee is being dispensed and / or the coffee grind is too coarse tuned! • catch the...

  • Page 16

    16 optibean /optibean xl 2015/09 rev. 1.2 2.5 how to adjust a coffee? After installation, the machine must always be adjusted for the coffee beans to be used. Use this chapter to help you do this. Once the coffee-making process has been set, the user must always use the same bean melange (mixture). ...

  • Page 17

    17 2015/09 rev. 1.2 en optibean /optibean xl cappuccino and latte macchiato milk based drinks are drinks such as coffee latte, cappuccino and latte macchiato. F the prefect setting for the espresso has been found just copy this setting to all espresso based drinks, like cappuccino, latte macchiato. ...

  • Page 18

    18 optibean /optibean xl 2015/09 rev. 1.2 2.6 adjustment tips cream layer too low cream layer perfect cream layer missing or too light - grind too fine - bitter - preparation too long - too much ground dosing - coffee drips from splitter the coffee is ground too fine, or the dispensed coffee is too ...

  • Page 19

    19 2015/09 rev. 1.2 en optibean /optibean xl 2.7 advanced recipe settings before changing the advanced recipe settings (service menu 2.3) you should first know how the various parts such as valves, coffee grinder, ingredient motors and mixers work together, see section 2.8 time line recipe settings....

  • Page 20

    20 optibean /optibean xl 2015/09 rev. 1.2 3. Principles of operation item description item description 1. Coffee waste bin 12. Kw2 pump 10 bar 2. Drainage reservoir 13. Kw1 inlet valve 3. Bm1 espresso group 14. Pr pressure reducer 2 bar 4. Im1 coffee grinder 15. Fl1 flow meter 5. Coffee bean caniste...

  • Page 21

    21 2015/09 rev. 1.2 en optibean /optibean xl 3.1 water management code description code description wf water filter dv2 mixer valve 3/2 way (n.C.) kw1 inlet valve dv4 hot water valve 3/2 way (n.C.) pr pressure reducer 2 bar dv6 water expansion valve 3/2 way (n.O.) fl1 flow meter kw3 cold water valve...

  • Page 22

    22 optibean /optibean xl 2015/09 rev. 1.2 3.1.1 commissioning switch the machine on using the on/off switch. The display illuminates with the text; ‘position drip tray and press start’. The inlet valve [kw1] opens, the water flows via the pressure reducer [pr], flow meter [fl1], pump [kw2] to the pr...

  • Page 23

    23 2015/09 rev. 1.2 en optibean /optibean xl meter [fl1] has measured the set amount of water, the coffee-making process is stopped. +kw1 and dv1 close and dv6 opens. While the brewer turns to the start position [fill], the coffee residue (pellet) is ejected into the waste bin. 3.1.5 chocolate prepa...

  • Page 24

    24 optibean /optibean xl 2015/09 rev. 1.2 3.2 componenten component image inlet valve kw1 [1001161] opens and closes the water supply, 24 vdc coil closure. Pressure reducer dr [1000702] reduces the water supply pressure to 2 bar. The water pressure is not adjustable. Pay attention for the flow direc...

  • Page 25

    25 2015/09 rev. 1.2 en optibean /optibean xl component image brewer valve dv1 [1000699] supplies the brewer with hot water at 10 bar. When the valve is energised, the hot water supply to the brewer is opened. When this closes, the brewer is vented. Expansion water valve dv6 [1000699] pressure relief...

  • Page 26

    26 optibean /optibean xl 2015/09 rev. 1.2 component image espresso group [1000088] the brewer is filled with ground coffee from the coffee grinder. Then the coffee is compacted, the pump starts and pumps hot water at a pressure of 10 bar through the coffee. The drink flows via the splitter into the ...

  • Page 27

    27 2015/09 rev. 1.2 en optibean /optibean xl component image cup detection sensor [1003231] reflection infrared sensor. This sensor can optionally build in the machine door. This sensor checks whether there is a cup / mug positioned under the (correct) spout. See chapter 3 .3 cup detection for opera...

  • Page 28

    28 optibean /optibean xl 2015/09 rev. 1.2 3.3 cup detection (optional) the sensors detect the presence of a cup below the coffee outlet of the beverage dispenser. Coffee is only prepared when a cup has been placed. Also the outlet for hot water is equipped with a cup sensor. The sensitive sensors wi...

  • Page 29

    29 2015/09 rev. 1.2 en optibean /optibean xl 3.4 espresso group the espresso group consists of a drive unit [4.1] and an espresso unit [4]. The dc motor [4.1] in the drive unit drives the espresso unit. The upper [4.5] and lower piston [4.7] are moved up and down by the drive wheels located in the s...

  • Page 30

    30 optibean /optibean xl 2015/09 rev. 1.2 3.4.1 operation the ground coffee is measured into the espresso group and then the group closes. Hot water is forced at high pressure through the layer of coffee. The complete espresso cycle is described and illustrated below. This also explains the function...

  • Page 31

    31 2015/09 rev. 1.2 en optibean /optibean xl 3.4.2 espresso brewer spec’s from year 2013 the optibean can be executed with following brewers: standard brewer xl brewer Ø 37mm Ø 44mm min. 0,23 - max. 0,35* ounces min. 0,34 - max 0,47* ounces min. 50 - max. 150 ml min. 150 - max. 230 ml * max. 9,0 gra...

  • Page 32

    32 optibean /optibean xl 2015/09 rev. 1.2 3.4.3 position switches when the machine is switched on, the software checks the espresso group by running it through a complete cycle. In the drive unit there are two micro switches that check the position of the espresso group. Switch [1] checks (white lev...

  • Page 33

    33 2015/09 rev. 1.2 en optibean /optibean xl 3.5 grinder the grinder is driven by a powerful dc motor [2.6]. The upper grinding disk [2.2] is fixed. The lower grinding disk [2.3] is driven by a drive belt [2.4]. The grind fineness can be set with an adjustment screw [2.5]. When the screw is turned c...

  • Page 34

    34 optibean /optibean xl 2015/09 rev. 1.2 3.5.1 basic adjustment the coffee grinder is factory set for an average grind fineness. Warning • keep your fingers away from the grinding mechanism when the machine is in operation. Warning • if there is a sound of two stones rubbing against each other, mak...

  • Page 35

    35 2015/09 rev. 1.2 en optibean /optibean xl 3.5.2 service life the service life of the ceramic grinding disks is approximately 3x longer than steel grinding disks. The service life depends on the type of coffee beans* and is approx. 3,000 kg of coffee beans. With an average measure of 7.5 g/cup. Th...

  • Page 36

    36 optibean /optibean xl 2015/09 rev. 1.2 3.5.5 replacement drive belt coffee grinder housing disassembly 1. Remove the bean- and instant canister [1] and remove the cover plate [2] behind it. 2. Disconnect the electrical connections to the small coffee grinder circuit board (via the rear wall). 3. ...

  • Page 37

    37 2015/09 rev. 1.2 en optibean /optibean xl 3.5.6 cleaning depending on the fineness of the grind and the intensity of use, coffee residue collects in the grinder housing and on the grinding disks (fine particles, coffee oil, cof - fee residue), which can affect the grinding capacity, the measuring...

  • Page 38

    38 optibean /optibean xl 2015/09 rev. 1.2 3.6 instant group the instant product (ingredient) is pushed out of the canister [ 1 ] by a worm screw and falls via the dispensing nozzle into the mixer unit [ 3.4 ]. At the same time, hot water is dispensed into the mixer unit. The instant product and the ...

  • Page 39

    39 2015/09 rev. 1.2 en optibean /optibean xl 3.6.1 ventilation mixer group the fan on the rear side of the machine ventilates the mixer group. The fan is easy to remove by turning the screw underneath. The fan speed can be adjusted in the service menu: 2.4 settings │ └── 2.4.05 ventilator │ └─── fan...

  • Page 40

    40 optibean /optibean xl 2015/09 rev. 1.2 3.7 boiler system turn on the device using the on/off switch. The display will light up. If the boiler [1] is empty (first installation or after running the shut down menu) the commissioning menu will automatically starts and will guides you trough the filli...

  • Page 41

    41 2015/09 rev. 1.2 en optibean /optibean xl reset dry boil protection this double pole dry boil protection [1.4] protects the heating element [1.3] against dry boiling. When the switch detects a temperature above 135°c both contacts switch off and disconnect both heating connection from the electri...

  • Page 42

    42 optibean /optibean xl 2015/09 rev. 1.2 3.7.1 dispensing valves the dispensing valves [2] used in the optibean are all the same and are so called 3-way valves. Brewer valve dv1, mixer valve dv2 and hot water valve dv4 are used as n.C. Valve (normally closed). The connection p [2.1] is connected to...

  • Page 43

    43 2015/09 rev. 1.2 en optibean /optibean xl 7,6 ltr. 2,3 ltr. 1,1 ltr. Dv1 dv2 dv4 dv6 opv 3bar opv 12bar brewer mixer hot water boiler [1] [2] 3.7.2 removing / replacing valves warning • pressurised hot water! Do not remove components like valves, couplings, plugs and hoses before depressurise the...

  • Page 44

    44 optibean /optibean xl 2015/09 rev. 1.2 4. Menu structure 4.1 the operator / service menu most of the settings, including the product settings are secured by a pin code. This pin code is intended to prevent the user accessing the service menu. It is recommended not to leave this document with the ...

  • Page 45: ▲

    45 2015/09 rev. 1.2 en optibean /optibean xl • menu items are connected to each other in a ‘loop’. • exit the operator menu; press the x key 1x. • exit the service menu; press the x key 2x. • after exiting the service menu, a long peep signal follows as a sign that changed settings are being stored ...

  • Page 46

    46 optibean /optibean xl 2015/09 rev. 1.2 4.2 the operator menu operator menu main item sub-item range set description 1.0 free vend yes-no yes set the machine for free or paid vending. 1.1 clock time hh:mm set the clock to the correct local time. Date dd-mm-yyyy set the clock to the correct local d...

  • Page 47

    47 2015/09 rev. 1.2 en optibean /optibean xl example: three switching times set machine automatically switches from stand-by to on at 9 am. At 11am back to stand-by, etc., etc. During stand-by the key panel is switched off and the boiler temperature drops to the set stand-by temperature (menu 2.4 se...

  • Page 48

    48 optibean /optibean xl 2015/09 rev. 1.2 operator menu continued... Main item sub-item range set description 1.3 recipe counters recipe 1 recipe 12 total cups total count per recipe (from free till jugs). Number of drinks free number of drinks paid low price number of drinks paid high price number ...

  • Page 49

    49 2015/09 rev. 1.2 en optibean /optibean xl 4.3 the service menu service menu main item sub-item item bereik set beschrijving 2.1 quick recipe pro 1 12 cup volume 25-350 ml 120ml here you can easily set the volume and strength of coffee, milk, sugar, cocoa your- self for each recipe (drink key). On...

  • Page 50

    50 optibean /optibean xl 2015/09 rev. 1.2 optilight colour recipes optilight red green blue optilight red green blue red 100% 0% 0% light blue 0% 100% 100% green 0% 100% 0% white 100% 100% 100% blue 0% 0% 100% pink 100% 0% 10% yellow 100% 50% 0% orange 100% 15% 0% table 1 purple 100% 0% 100% key swi...

  • Page 51

    51 2015/09 rev. 1.2 en optibean /optibean xl service menu continued ... Main item sub-item sub item range set description 2.3 recipe settings 1 12 unit 1 dv 1 wt 0,0-30,0 s wachttijd doseerventiel 1 dv 1 0-100 ml doseerhoeveelheid doseerventiel 1 (brewer) koffie wt 0,0-30,0 s 0,5 s wachttijd koffiem...

  • Page 52

    52 optibean /optibean xl 2015/09 rev. 1.2 service menu continued ... Main item sub-item sub item range description 2.3 recipe settings (continued....) 1 12 unit 2 dv 2 wt 0,0-30,0 s pressure valve delay time 2 dv 2 0-100 ml pressure valve measurement quantity 2 rinse 2 wt 0,0-20,0 s pressure valve r...

  • Page 53

    53 2015/09 rev. 1.2 en optibean /optibean xl service menu vervolg ... Hoofd item sub item item bereik set beschrijving 2.4 settings language english display language selection. English is factory set. Other languages on request (if available) nederlands (dutch) deutsch (german) français (french) sve...

  • Page 54

    54 optibean /optibean xl 2015/09 rev. 1.2 service menu continued ... Main item sub-item item range set description 2.4 settings (continued...) coin system none no payment system connected g13 coin channel 1 coin channel 6 0-100.00 + token € 0.05 € 0.10 € 0.20 € 0.50 € 1.00 € 2.00 coin value per chan...

  • Page 55

    55 2015/09 rev. 1.2 en optibean /optibean xl service menu continued ... Main item sub-item item range set description 2.4 settings (continued...) i/0 reset counters yes-no no add menu item reset counters to the operator menu. I/0 quick recipe yes-no no menu item snelrecept aan het opera- tormenu toe...

  • Page 56

    56 optibean /optibean xl 2015/09 rev. 1.2 service menu vervolg ... Hoofd item sub item item bereik set beschrijving 2.5 reset counters service counters rinse counter? Reset rinse counter. Clean counter? Reset cleaning counter. Recipe counters recipe counter 1 - 12 reset recipe counters for each reci...

  • Page 57

    57 2015/09 rev. 1.2 en optibean /optibean xl service menu continued ... Main item sub-item sub range description 2.7 hardware test inputs temp boiler temp °c shows the status of the sensors/switches concerned 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 1 2 3 4 5 16 drip tray sensor yes/no waste bin ye...

  • Page 58

    58 optibean /optibean xl 2015/09 rev. 1.2 service menu continued ... Main item sub-item sub item description 2.7 hardware test (continued...) calibration water system flow meter 1.850 p/ml (1.700-2.000) with this (if necessary) the flow meter can be calibrated. The calibration is not described becau...

  • Page 59

    59 2015/09 rev. 1.2 en optibean /optibean xl service menu continued ... Main item sub-item item description 2.8 read log last 20 error messages including time and date will be saved 2.9 erase log are you sure? Log will be erased 2.10 load defaults # see section 1.2 model code model # ob1 ob3 type co...

  • Page 60

    60 optibean /optibean xl 2015/09 rev. 1.2 service menu continued ... Main item sub-item item description 2.11 sd menu (continued....) save data memory card memory card personal settings with this menu item personal settings can be saved on an sd memory card and/or copied to another machine. All chan...

  • Page 61

    61 2015/09 rev. 1.2 en optibean /optibean xl service menu continued ... Main item sub-item item range set description 2.12 change pin code new pin code repeat pin code with this menu item the pin code can be changed. Use only the keys 1 to 4. The complete service menu is secured behind this pin code...

  • Page 62

    62 optibean /optibean xl 2015/09 rev. 1.2 service menu continued ... Main item sub-item item range set description 2.14 installation commissioning when a new machine is switched on, the com- missioning menu starts automatically. Follow the instructions on the display. Shut down start this shut down ...

  • Page 63

    63 2015/09 rev. 1.2 en optibean /optibean xl 5. Software 5.1 memory card specs geheugen kaart spec’s type: sd (secure digital card) size: 16 mb or bigger 5.2 machine setting management the following changed settings can be saved on an sd memory card and/or copied to another machine: - personal setti...

  • Page 64

    64 optibean /optibean xl 2015/09 rev. 1.2 when loading new software the following changed settings (data) are lost: - changed recipes - changed personal settings - a non-standard language file will be overwritten by the standard language file nl/gb/du/fr counts, log and operating hours will be prese...

  • Page 65

    65 2015/09 rev. 1.2 en optibean /optibean xl 6. Maintenance 6.1 daily rinsing program after 1 day the display shows rinse. This message will disappear again after the rinsing program is executed. Place cup rinse 4 min. 10 min. 1 min. 6 min. 1. A) activate the rinsing program [1a] and follow the inst...

  • Page 66

    66 optibean /optibean xl 2015/09 rev. 1.2 6.2 weekly cleaning program after 7 days appears the display shows cleaning. This message will disappear again after the cleaning program is executed. Place cup cleaning 4 min. 10 min. 1 min. 6 min. 1. Activate the cleaning program [1] and follow the instruc...

  • Page 67

    67 2015/09 rev. 1.2 en optibean /optibean xl 6.3 periodic maintenance 6.3.1 service boiler during installation of the machine the boilers service moment has been set. See service menu item 2.6 service boiler / 2.6.1 service moment during use, the drinks are counted. When the boiler service moment is...

  • Page 68

    68 optibean /optibean xl 2015/09 rev. 1.2 6.3.2 service brewer the service moment brewer is factory set. See service menu item 2.13 other settings / 2.13.2 service brewer during use the brewer movements are counted. When the service brewer moment is reached the text [ service brewer ] will appear in...

  • Page 69

    69 2015/09 rev. 1.2 en optibean /optibean xl 6.4 service contracts preface preventive maintenance will extend the service life of the machine and reduce the chance of malfunctions. Read the (safety) instructions carefully in the user manual, service manual and on the cleaning agents to be used befor...

  • Page 70

    70 optibean /optibean xl 2015/09 rev. 1.2 activities time consumables art.No. Optibean 2 3 boiler 2-2 10 min change filter cartridge - in case a water filter is installed , replace the cartridge for a new one. - reset the 2.6 service boiler signal in the service menu grinder 10 min. Empty the grinde...

  • Page 71

    71 2015/09 rev. 1.2 en optibean /optibean xl activities time consumables art.No. Optibean 2 3 mixer(s) 10 min. Check the motor shaft for dirt and wear. Replace mixer in case it runs heavy or raw. Replace mixer blade. 03254 1x 1x replace the shaft seal and o-ring in the green mixer mounting ring. Lub...

  • Page 72

    72 optibean /optibean xl 2015/09 rev. 1.2 activities time consumables art.No. Optibean 2 3 checking (general) check the complete machine operation. Check parts for damage/wear and/ or leaks. Cleaning (general) clean the espresso group brewer and mixer unit for weekly cleaning. Complete machine, insi...

  • Page 73

    73 2015/09 rev. 1.2 en optibean /optibean xl warning • during maintenance activities, remain with the machine. • when de-scaling, always follow the instructions for the de-scaling agent used. • it is advisable to wear safety glasses and protective gloves when de-scaling. • after de-scaling, let the ...

  • Page 74

    74 optibean /optibean xl 2015/09 rev. 1.2 4. Remove the back and connect the suction tube to the tee of the flow meter (remove plug). Descaling place suction tube in descaler solution press enter (v) 5. The first acid solution (approx. 1 litre) is pumped into the boiler and heated. A soaking period ...

  • Page 75

    75 2015/09 rev. 1.2 en optibean /optibean xl 7. After the soaking interval, the suction hose must be removed and the plug refitted. Descaling remove hose place stop place empty container press enter (v) 8. The boiler is flushed (6 times*) with fresh water. In between, empty and secure the drip tray....

  • Page 76

    76 optibean /optibean xl 2015/09 rev. 1.2 6.6 maintenance espresso group 6.6.1 brewer replacement kit 25k - after 25,000 cycles the filters and seals must be replaced. The display shows [ service brewer ]. Place cup service brewer brewer replacement kit 25k brewer standard xl art. No. 1001395 100256...

  • Page 77

    77 2015/09 rev. 1.2 en optibean /optibean xl 5. To place a new o-ring [8] first unscrew bold [5]. 6. Pull out piston-rod [6]. 7. Unscrew the two screws which hold the lower flange [7]. 8. Place a new o-ring [8] and replace all parts in reversed order. 9. Place a new brewer outlet hose [9]. Always pl...

  • Page 78

    78 optibean /optibean xl 2015/09 rev. 1.2 6.7 check / set the pump pressure warning • pressurised hot water! Do not remove components like valves, couplings, plugs and hoses before depressurising the boiler system. 1. Activate the shut down menu in the service menu 2.14 installation / shut down and ...

  • Page 79

    79 2015/09 rev. 1.2 en optibean /optibean xl 7. Transport / shut down warning • pressurised hot water! Do not remove components like valves, couplings, plugs and hoses before depressurise the boiler system. • the drain hose becomes hot!! • after the boiler has been emptied the pump starts to pump ou...

  • Page 80

    80 optibean /optibean xl 2015/09 rev. 1.2 8. Component accessibility ingredient motor ventilator flow meter pump inlet valve grinder grinder pc board main pc board 24v power supply brewer waste bin drip tray full sensor bean canister dispensing valve mixer dispensing valve.

  • Page 81

    81 2015/09 rev. 1.2 en optibean /optibean xl service panel ciruit board brewer coffee outlet display bean canister mixer brewer valve door switch coffee residue reservoir drainage reservoir drainage outlet instant canisters.

  • Page 82

    82 optibean /optibean xl 2015/09 rev. 1.2 9. Electronics overview warning during repair and/or maintenance activities, avoid electrostatic discharges (esd) to the control. ● main control .................................................. 9.1 ● interface / display .......................................

  • Page 83

    83 2015/09 rev. 1.2 en optibean /optibean xl 9.1.1 main circuit board inputs connector j12 connecting cable between the main circuit board and the door circuit board connector j250 (pwm fan) pin fan colour notes 1 pwm signal black 2 - 3 pos red 4 neg blue connector j7 (inputs) pin sensor colour note...

  • Page 84

    84 optibean /optibean xl 2015/09 rev. 1.2 connector j1 (supply) pin colour notes 1 ground (gnd) black 2 ground (gnd) black 3 +24 vdc red 4 +24 vdc red 9.1.2 main circuit board outputs connector j2 pin motor colour notes 17-18 brewer black pay attention to the right direction! Common +24 vdc (red wir...

  • Page 85

    85 2015/09 rev. 1.2 en optibean /optibean xl 9.1.3 main circuit board communication the machine has standardized vending machine con- nections for connecting coin mechanism, coin changer or cashless payment systems. These connectors meet the mdb protocol for vending machines. For further information...

  • Page 86

    86 optibean /optibean xl 2015/09 rev. 1.2 9.2 interface / display the interface connects all the components located in and on the door and is connected by a cable to the main control. 9.2.1 connections interface & display conn notes j100 main control j101 front membrane panel j102 service membrane p...

  • Page 87

    87 2015/09 rev. 1.2 en optibean /optibean xl 9.3 power supply the 24 vdc supply consists of a 24 vdc – 65 w switched power supply and can be accessed by removing the rear wall. ● on an overload, the power supply switches itself off automatically. Reset the power supply by turning the main switch off...

  • Page 88

    88 optibean /optibean xl 2015/09 rev. 1.2 9.4 grinder print 230vac / 230vdc this grinder circuit board converts 230 vac (alternating current) into 230 vdc (direct current) with a rectifier to drive the grinder motor. The im1 signal (24 vdc) from the main control is connected to connection j5-j6 (the...

  • Page 89

    89 2015/09 rev. 1.2 en optibean /optibean xl 10. Fault rectification warning ● when there are defects and for (cleaning) activities on the machine, the plug must be removed from the wall socket before the machine is opened introduction check, before troubleshooting whether all the components are sti...

  • Page 90

    90 optibean /optibean xl 2015/09 rev. 1.2 10.3 display messages during use display possible cause action make your choice rinsing rinse program not activated in time. Run the rinse program and follow the instructions in the display. See chapter 6. Maintenance / 6.1 daily rinsing program make your ch...

  • Page 91

    91 2015/09 rev. 1.2 en optibean /optibean xl display possible cause action out of order door open for safety reasons, the machine automatically switches off if the door is opened. The machine can be operated with the door open by using the door pin. Out of order stand-by the machine is on standby. T...

  • Page 92

    92 optibean /optibean xl 2015/09 rev. 1.2 display possible cause action make your choice cup sensor left error the cup detection sensor as shown in the display is faulty cup detection window is dirty the fault can be (temporarily) be neutralized by pressing the stop button. After 20 reset attempts t...

  • Page 93

    93 2015/09 rev. 1.2 en optibean /optibean xl 10.4 troubleshooting display possible cause action out of service e3 fill error boiler is filling too slowly. During commissioning the inlet valve kw1 must have filled the boiler within 180 seconds. Check the water pressure, fully open the water supply ta...

  • Page 94

    94 optibean /optibean xl 2015/09 rev. 1.2 display possible cause action out of service e14 output group error ingredient motor output group overloaded (current too high). The control has disabled the output. Carry out the checks as specified for e11. Switch the machine off and on again. Valve output...

  • Page 95

    95 2015/09 rev. 1.2 en optibean /optibean xl display possible cause action out of service e24 brewer error brewer schakelaars komen niet in de juiste positie tijdens het zet- proces. Gedetecteerd door brewer schakelaar 2 (links) controleer of brewer goed in motor unit is geplaatst. Controleer brewer...

  • Page 96

    96 optibean /optibean xl 2015/09 rev. 1.2 11. Special options 1.1 installation drain set required equipment and tools: • crosshead screwdriver • drain hose kit [1001347] 1. Remove the plastic plug under the brewer valve and next to the inlet valve. 2. Remove the drain hoses from the y-piece and brew...

  • Page 97

    97 2015/09 rev. 1.2 en optibean /optibean xl 11.3 installation optibean with waste to litter bin required equipment: • optibean • base cabinet with access to litter bin [1001559] • top board with access to litter bin, [65031] small or [65032] large. 1. Build up the cabinet according the instructions...

  • Page 98

    98 optibean /optibean xl 2015/09 rev. 1.2 12. Payment systems 12.1 coin mechanism (optional) the optibean is available with an optional coin mechanism suitable for euros (€ 0.05 to 2.00). Other currencies are available on request. The coin mechanism can also be easily programmed for a token (coffee ...

  • Page 99

    99 2015/09 rev. 1.2 en optibean /optibean xl s1 s2 10x 10x 12.1.3 activate existing token the token shown opposite is already programmed as standard in the coin mechanism. Set the service menu as described in the following section from step 4. Art. No. Token 03344 12.1.4 programming a new token ● re...

  • Page 100

    100 optibean /optibean xl 2015/09 rev. 1.2 12.1.6 accepting tokens only (no euro’s) carry out sections 12.1.3 and 12.1.4 beforehand. 1. Open the service menu 2. Set to token using menu 2.2 button settings / button 1-12 / price. 3. Block the €0.05 - €2.00 coins using the coin mechanism dil switches a...

  • Page 101

    101 2015/09 rev. 1.2 en optibean /optibean xl 1 2 3 4 12.2 coin changer (optional) the optibean is available with an optional coin changer suitable for euros (€ 0.05 to 2.00). Other currencies are available on request. The changer has 6 change tubes (€ 0.05 / 2x 0.10 / 0.20 / 0.50 / 1.00). 1. Return...

  • Page 102

    102 optibean /optibean xl 2015/09 rev. 1.2 12.2.3 programme a new token the token shown opposite is already programmed in the coin changer [token a]. For programming a new token {[b] see detailed token teach instructions in the nri technical documentation. Attention; switch the machine off/on twice ...

  • Page 103

    103 2015/09 rev. 1.2 en optibean /optibean xl.

  • Page 104

    104 optibean /optibean xl 2015/09 rev. 1.2.

  • Page 105

    105 2015/09 rev. 1.2 en optibean /optibean xl.

  • Page 106

    106 optibean /optibean xl 2015/09 rev. 1.2.

  • Page 107

    107 2015/09 rev. 1.2 en optibean /optibean xl 70 0 92 565 16 7 60 -1 15 79 2 36 3 16 3 767 23 6 coin sy st em (optional) coin sy st em (optional) coin system (optional) 409 463 - 485 coin sy st em (optional).

  • Page 108

    Animo b.V. Dr. A.F. Philipsweg 47 p.O. Box 71 9400 ab assen the netherlands tel. No. +31 (0) 592 376376 fax no. +31 (0) 592 341751 e-mail: info@animo.Nl www.Animo.Eu 2015/09 rev. 1.2 art.Nr 1001224 dedicated to every cup.