1. DL manuals
  2. Anita
  3. Sewing Machine
  4. GP-510- 141
  5. User Manual

Anita GP-510- 141 User Manual

Summary of GP-510- 141

  • Page 1

    User manual and spare parts list version 08/2011 gp-510- 141 anita b, s.R.O. Hliníky 2068 680 01 boskovice czech republic tel: +420 516454774, 516453496 fax: +420 516452751 e-mail: info@anita.Cz.

  • Page 2

    2.

  • Page 3

    3 anita-b gp-510-141 1 safety measures do not put the machine into operation until an appropriate preparation is carried out by a specialist or an authorised person, and until you get acquainted with safety measures. 1. Any sewing machine may be operated only by a properly trained operator. 2. Take ...

  • Page 4

    4 anita-b gp-510-141 2 putting the machine into operation following instructions must be observed to avoid risk of failures or damage to the machine: - clean the machine of preserving agents - drop 1-2 drops of oil into looper - remove the front cover and oil the ends of needle bar connecting-rod an...

  • Page 5

    5 anita-b gp-510-141 3 threading the upper thread caution! Switch off the main switch and remove your feet from the pedals on the machine support before threading so that the machine may not be started by unintended treading on the pedal. When threading the thread from bobbin stand into needle follo...

  • Page 6

    6 anita-b gp-510-141 4 inserting needles caution ! Switch off the main switch and remove your feet from the pedals on the machine support before replacing needles so that the machine may not be started by unintended treading on the pedal. Fig.3 having chosen the right thickness (size) of needle whos...

  • Page 7

    7 anita-b gp-510-141 caution! Do not start the machine until you put the hook covers in working (protecting) position. Switch off the main switch and remove your feet from the pedals on the machine support before replacing the hook bobbin so that the machine may not be started by unintended treading...

  • Page 8

    8 anita-b gp-510-141 7 adjusting differential feed ratio (only for machines with driven presser foot) to ensure sewing of fabric layers without their displacement in the course of feeding it is possible to adjust different lengths of feeding driven by press-wheel and feeding by rotary feed dog. To a...

  • Page 9

    9 anita-b gp-510-141 the sewing machines are equipped with a safety clutch on the lower shaft (a) fig. 8 that allows the operator to turn the driving part of lower shaft (a) when the loopers or feed dogs are locked. The clutch consists of segment (b) engaging with.Groove (c) in the disk on lower sha...

  • Page 10

    10 anita-b gp-510-141 10 switching off and switching on of the main switch the main switch are marked 0 and i or they have grey/green and red buttons. Pushing position of the button marked "0" (red) means: off, pushing position of the button marked "i" (grey/green) means on. Caution! Before you star...

  • Page 11

    11 anita-b gp-510-141 12 bobbin winder – standard built in fig. 9 the thread passes from the bobbin stand through thread guide on the winder bracket (1) and between tension disks (2) and then following the direction of arrow (s) to the empty bobbin. Install the empty bobbin on the bobbin winder shaf...

  • Page 12

    12 anita-b gp-510-141 instructions for adjustment 13 basic condition a) clearance between the throat plate and the bobbin case stopper. Fig.10 condition : clearance between the top end of the bobbin case resting groove on the throat plate and the top face of the bobbin case stopper of the hook : 1,4...

  • Page 13

    13 anita-b table of contents gp-510-141 spare parts lists a1 frame and cover parts, thread tension mechanism………….…..14,15 b upper shaft mechanism………………………….………………..16,17 c1 lower shaft and clutch mechanism………………………………..18,19 c2 timing belt drivingmechanism……………………………………20,21 d1 needle feed and drive...

  • Page 14

    14 anita-b frame and cover parts,thread tension mechanism a1 gp-510-141.

  • Page 15

    15 anita-b frame and cover parts,thread tension mechanism a1 gp-510-141 ref.No. Part no. Name of part q´ty a1-1 5-1 face plate 1 a1-2 108246 screw (m5x0,8x25) 1 a1-3 108234 screw (m5x0,8x35) 1 a1-4 168061 thread take-up cover 1 a1-5 210210 screw (m5x0,8x8) 1 a1-6 119027 4 hole thread retainer 1 a1-7...

  • Page 16

    16 anita-b upper shaft mechanism b gp-510-141.

  • Page 17

    17 anita-b upper shaft mechanism b gp-510-141 ref.No. Part no. Name of part q´ty b-1 119702-2 crank cam 1 b-2 130224 screw (m5x0,8x12) 2 b-3 119702-3 screw (m7x1,0x22) 1 b-4 119702-4 screw (m7x1,0x16,5) 1 b-5 700510 screw (m6x0,75x8) 3 b-6 119702-5 bushing 1 b-7 119702-1 upper shaft 1 b-8 200-002 up...

  • Page 18

    18 anita-b lower shaft and clutch mechanism c1 gp-510-141.

  • Page 19

    19 anita-b lower shaft and clutch mechanism c1 gp-510-141 ref.No. Part no. Name of part q´ty c1-1 175025 shaft 1 c1-2 518250 retaining ring 1 c1-3 119711 shaft 1 c1-4 175019 coupler 1 c1-5 341901 screw (m6x0,75x6) 4 c1-6 133109 coupler 1 c1-7 119081a connecting plate 1 c1-7- 1 700510 screw (m6x0,75x...

  • Page 20

    20 anita-b timing belt driving mechanism c2 gp-510-141.

  • Page 21

    21 anita-b c2 gp-510-141 ref.No. Part no. Name of part q´ty c2-1 119097 plug 2 c2-2 610300 retaining ring 1 c2-3 018624 ball bearing 2 c2-4 119707 timming belt wheel 1 c2-5 335902-1 screw (m6x0,75x8) 2 c2-6 335902 screw (m6x0,75x10) 2 c2-7 119121 collar (left) 1 c2-8 700689 screw (m6x0,75x4,5) 4 c2-...

  • Page 22

    22 anita-b needle feed and driven roller mechanism d1 gp-510-141.

  • Page 23

    23 anita-b needle feed and driven roller mechanism d1 gp-510-141 ref.No. Part no. Name of part q´ty d1-1 119164 clamp 1 d1-2 108177 screw (m4x0,7x10) 1 d1-3 119163 crank 1 d1-4 108225 screw (m5x0,8x10) 1 d1-5 119085 washer 1 d1-6 119511 upper side shaft 1 d1-7 118600 bushing (23mm) 2 d1-8 215124 nee...

  • Page 24

    24 anita-b lower feed mechanism d2 gp-510-141.

  • Page 25

    25 anita-b lower feed mechanism d2 gp-510-141 ref.No. Part no. Name of part q´ty d2-1 119795 roller bracket 1 d2-1-1 119795-1 roller bracket 1 d2-1-2 119795-2 roller bracket 1 d2-1-3 119795-3 screw 3 d2-1-4 119795-4 screw 3 d2-1-5 119795-5 ball d.2mm 23 d2-2 119737 bevel gear 1 d2-2-1 119737-1 bevel...

  • Page 26

    26 anita-b feed shaft mechanism d3 gp-510-141.

  • Page 27

    27 anita-b feed shaft mechanism d3 gp-510-141 ref.No. Part no. Name of part q´ty d3-1 610280 retaining ring 1 d3-2 119085 washer 1 d3-3 133283 washer 6 d3-4 215124 needle bearing 3 d3-5 118600 bushing 1 d3-6 119163 crank 1 d3-7 108225 screw (m5x0,8x10) 1 d3-8 119164 clamp 1 d3-9 108177 screw (m4x0,7...

  • Page 28

    28 anita-b stitch adjuster mechanism d4 gp-510-141.

  • Page 29

    29 anita-b stitch adjuster mechanism d4 gp-510-141 ref.No. Part no. Name of part q´ty d4-1 175038 connecting rod 1 d4-2 069060 ball bearing 1 d4-3 175038a crank rod set 1 d4-4 215028 needle bearing 1 d4-5 118612 bearing stud 1 d4-6 165356 feeding adjusting plate 1 d4-7 165356-1 screw (m5x0,8x20) 1 d...

  • Page 30

    30 anita-b needle bar feed and presser foot mechanism e gp-510-141.

  • Page 31

    31 anita-b needle bar feed and presser foot mechanism e gp-510-141 ref.No. Part no. Name of part q´ty e-7 175096 needle bar 1 e-8 174173 screw(m3x0,5x4) 1 e-9 175096-2 thread guide 1 e-10 175150 pin 1 e-11 215028 needle bearing 2 e-12 169137 washer (14x8,1x1mm) 2 e-13 305305 screw (m6x1,0x25) 2 e-14...

  • Page 32

    32 anita-b thread take-up lever mechanism f gp-510-141.

  • Page 33

    33 anita-b thread take-up lever mechanism f gp-510-141 ref.No. Part no. Name of part q´ty 500-149 f-1 118084 thread take-up assy 1 f-2 119009 take-up lever support stud 1 f-3 168039 washer 2 f-4 215022 needle bearing 2 f-5 119008 take-up frame 1 f-6 119762 take-up crank pin 1 f-7 119049 bushing 1 f-...

  • Page 34

    34 anita-b roller presser foot mechanism g1 gp-510-141.

  • Page 35

    35 anita-b roller presser foot mechanism g1 gp-510-141 ref.No. Part no. Name of part q´ty g1-1 119803 roller preser assy (large) 1 g1-2 119803-1 roller preser assy (middle) 1 g1-3 119802 roller preser assy (small) 2 g1-4 119469 spring washer 2 g1-5 033145 pin 1 g1-6 175109 gear 1 g1-6-1 175109-1 gea...

  • Page 36

    36 anita-b presser foot bar mechanism g2 gp-510-141.

  • Page 37

    37 anita-b presser foot bar mechanism g2 gp-510-141 ref.No. Part no. Name of part q´ty g2-1 119019 presser bar bushing (upper) 1 g2-2 700785 screw (m5x0,8x6) 2 g2-3 119018 presser bar bushing (upper) 1 g2-4 118530 presser bar holder 1 g2-5 700510 screw (m6x0,75x8) 2 g2-6 119019-1 presser bar bushing...

  • Page 38

    38 anita-b right side hook mechanism h1 gp-510-141.

  • Page 39

    39 anita-b right side hook mechanism h1 gp-510-141 ref.No. Part no. Name of part q´ty h1-1 g400s hook complete with bobbin case 1 h1-1-1 g400s-589 hook complete without cap 1 h1-1-2 g400s-582 hook without cap holder 1 h1-1-3 g400t-017 tension spring fastening screw 1 h1-1-4 g400s-046 gib 1 h1-1-5 g4...

  • Page 40

    40 anita-b right side hook post mechanism i1 gp-510-141.

  • Page 41

    41 anita-b right side hook post mechanism i1 gp-510-141 ref.No. Part no. Name of part q´ty i1-2 250084 srew/šroub(m3x0.5x6) 4 i1-3 175267 cover plate 1 i1-4 700336 screw/šroub(m4x0,7x6) 2 i1-5 175318 stud/excentr 1 i1-6 330217 screw/šroub(m5x4.5) 1 i1-7 175324 hook post 1 i1-8 119436 post cap assy 1...

  • Page 42

    42 anita-b left side post mechanism i3 gp-510-141.

  • Page 43

    43 anita-b left side post mechanism i3 gp-510-141 ref.No. Part no. Name of part q´ty i3-1 119145 cover plate/kryt 1 i3-2 250084 screw/šroub(m3x0,5x6) 4 i3-3 119721 support plate/levý sloupek 1 i3-4 119144 washer/podložka 2 i3-5 130224 screw/šroub(m5x0,8x12) 2 i3-6 182451 screw/šroub(m6x1,0x14) 1 i3-...

  • Page 44

    44 anita-b bobbin winder n1 gp-510-141 ref. No. Part no. Name of part q´ty n1-1 p980025248 thread guide/ vodi č úplný 1 n1-7 102243 knife/n ů ž 1 n1-8 102243-1 clamping plate/pérko 1 n1-9 102243-2 clamping plate/pérko 1 n1-10 108093 screw/šroub 1 n1-11 200-002 upper shaft gear winder/kolo náhonu nav...

  • Page 45

    45 anita-b accessories n2 gp-510-141.

  • Page 46

    46 anita-b accessories n2 gp-510-141 ref.No. Part no. Name of part q´ty n2-1 123456 accessory bag 1 n2-2 029836 vinyl cover 1 n2-3 800110 spanner 1 n2-4 129915 screw driver (small) 1 n2-5 029946 screw driver (middle) 1 n2-6 029007 screw driver (large) 1 n2-7 134lr needle 10 n2-8 029394 oiler 1 n2-9 ...

  • Page 47

    47.