User manual and spare parts list version 08/2011 gp-510- 141 anita b, s.R.O. Hliníky 2068 680 01 boskovice czech republic tel: +420 516454774, 516453496 fax: +420 516452751 e-mail: info@anita.Cz.
2.
3 anita-b gp-510-141 1 safety measures do not put the machine into operation until an appropriate preparation is carried out by a specialist or an authorised person, and until you get acquainted with safety measures. 1. Any sewing machine may be operated only by a properly trained operator. 2. Take ...
4 anita-b gp-510-141 2 putting the machine into operation following instructions must be observed to avoid risk of failures or damage to the machine: - clean the machine of preserving agents - drop 1-2 drops of oil into looper - remove the front cover and oil the ends of needle bar connecting-rod an...
5 anita-b gp-510-141 3 threading the upper thread caution! Switch off the main switch and remove your feet from the pedals on the machine support before threading so that the machine may not be started by unintended treading on the pedal. When threading the thread from bobbin stand into needle follo...
6 anita-b gp-510-141 4 inserting needles caution ! Switch off the main switch and remove your feet from the pedals on the machine support before replacing needles so that the machine may not be started by unintended treading on the pedal. Fig.3 having chosen the right thickness (size) of needle whos...
7 anita-b gp-510-141 caution! Do not start the machine until you put the hook covers in working (protecting) position. Switch off the main switch and remove your feet from the pedals on the machine support before replacing the hook bobbin so that the machine may not be started by unintended treading...
8 anita-b gp-510-141 7 adjusting differential feed ratio (only for machines with driven presser foot) to ensure sewing of fabric layers without their displacement in the course of feeding it is possible to adjust different lengths of feeding driven by press-wheel and feeding by rotary feed dog. To a...
9 anita-b gp-510-141 the sewing machines are equipped with a safety clutch on the lower shaft (a) fig. 8 that allows the operator to turn the driving part of lower shaft (a) when the loopers or feed dogs are locked. The clutch consists of segment (b) engaging with.Groove (c) in the disk on lower sha...
10 anita-b gp-510-141 10 switching off and switching on of the main switch the main switch are marked 0 and i or they have grey/green and red buttons. Pushing position of the button marked "0" (red) means: off, pushing position of the button marked "i" (grey/green) means on. Caution! Before you star...
11 anita-b gp-510-141 12 bobbin winder – standard built in fig. 9 the thread passes from the bobbin stand through thread guide on the winder bracket (1) and between tension disks (2) and then following the direction of arrow (s) to the empty bobbin. Install the empty bobbin on the bobbin winder shaf...
12 anita-b gp-510-141 instructions for adjustment 13 basic condition a) clearance between the throat plate and the bobbin case stopper. Fig.10 condition : clearance between the top end of the bobbin case resting groove on the throat plate and the top face of the bobbin case stopper of the hook : 1,4...
13 anita-b table of contents gp-510-141 spare parts lists a1 frame and cover parts, thread tension mechanism………….…..14,15 b upper shaft mechanism………………………….………………..16,17 c1 lower shaft and clutch mechanism………………………………..18,19 c2 timing belt drivingmechanism……………………………………20,21 d1 needle feed and drive...
14 anita-b frame and cover parts,thread tension mechanism a1 gp-510-141.
15 anita-b frame and cover parts,thread tension mechanism a1 gp-510-141 ref.No. Part no. Name of part q´ty a1-1 5-1 face plate 1 a1-2 108246 screw (m5x0,8x25) 1 a1-3 108234 screw (m5x0,8x35) 1 a1-4 168061 thread take-up cover 1 a1-5 210210 screw (m5x0,8x8) 1 a1-6 119027 4 hole thread retainer 1 a1-7...
16 anita-b upper shaft mechanism b gp-510-141.
17 anita-b upper shaft mechanism b gp-510-141 ref.No. Part no. Name of part q´ty b-1 119702-2 crank cam 1 b-2 130224 screw (m5x0,8x12) 2 b-3 119702-3 screw (m7x1,0x22) 1 b-4 119702-4 screw (m7x1,0x16,5) 1 b-5 700510 screw (m6x0,75x8) 3 b-6 119702-5 bushing 1 b-7 119702-1 upper shaft 1 b-8 200-002 up...
18 anita-b lower shaft and clutch mechanism c1 gp-510-141.
19 anita-b lower shaft and clutch mechanism c1 gp-510-141 ref.No. Part no. Name of part q´ty c1-1 175025 shaft 1 c1-2 518250 retaining ring 1 c1-3 119711 shaft 1 c1-4 175019 coupler 1 c1-5 341901 screw (m6x0,75x6) 4 c1-6 133109 coupler 1 c1-7 119081a connecting plate 1 c1-7- 1 700510 screw (m6x0,75x...
20 anita-b timing belt driving mechanism c2 gp-510-141.
21 anita-b c2 gp-510-141 ref.No. Part no. Name of part q´ty c2-1 119097 plug 2 c2-2 610300 retaining ring 1 c2-3 018624 ball bearing 2 c2-4 119707 timming belt wheel 1 c2-5 335902-1 screw (m6x0,75x8) 2 c2-6 335902 screw (m6x0,75x10) 2 c2-7 119121 collar (left) 1 c2-8 700689 screw (m6x0,75x4,5) 4 c2-...
22 anita-b needle feed and driven roller mechanism d1 gp-510-141.
23 anita-b needle feed and driven roller mechanism d1 gp-510-141 ref.No. Part no. Name of part q´ty d1-1 119164 clamp 1 d1-2 108177 screw (m4x0,7x10) 1 d1-3 119163 crank 1 d1-4 108225 screw (m5x0,8x10) 1 d1-5 119085 washer 1 d1-6 119511 upper side shaft 1 d1-7 118600 bushing (23mm) 2 d1-8 215124 nee...
24 anita-b lower feed mechanism d2 gp-510-141.
25 anita-b lower feed mechanism d2 gp-510-141 ref.No. Part no. Name of part q´ty d2-1 119795 roller bracket 1 d2-1-1 119795-1 roller bracket 1 d2-1-2 119795-2 roller bracket 1 d2-1-3 119795-3 screw 3 d2-1-4 119795-4 screw 3 d2-1-5 119795-5 ball d.2mm 23 d2-2 119737 bevel gear 1 d2-2-1 119737-1 bevel...
26 anita-b feed shaft mechanism d3 gp-510-141.
27 anita-b feed shaft mechanism d3 gp-510-141 ref.No. Part no. Name of part q´ty d3-1 610280 retaining ring 1 d3-2 119085 washer 1 d3-3 133283 washer 6 d3-4 215124 needle bearing 3 d3-5 118600 bushing 1 d3-6 119163 crank 1 d3-7 108225 screw (m5x0,8x10) 1 d3-8 119164 clamp 1 d3-9 108177 screw (m4x0,7...
28 anita-b stitch adjuster mechanism d4 gp-510-141.
29 anita-b stitch adjuster mechanism d4 gp-510-141 ref.No. Part no. Name of part q´ty d4-1 175038 connecting rod 1 d4-2 069060 ball bearing 1 d4-3 175038a crank rod set 1 d4-4 215028 needle bearing 1 d4-5 118612 bearing stud 1 d4-6 165356 feeding adjusting plate 1 d4-7 165356-1 screw (m5x0,8x20) 1 d...
30 anita-b needle bar feed and presser foot mechanism e gp-510-141.
31 anita-b needle bar feed and presser foot mechanism e gp-510-141 ref.No. Part no. Name of part q´ty e-7 175096 needle bar 1 e-8 174173 screw(m3x0,5x4) 1 e-9 175096-2 thread guide 1 e-10 175150 pin 1 e-11 215028 needle bearing 2 e-12 169137 washer (14x8,1x1mm) 2 e-13 305305 screw (m6x1,0x25) 2 e-14...
32 anita-b thread take-up lever mechanism f gp-510-141.
33 anita-b thread take-up lever mechanism f gp-510-141 ref.No. Part no. Name of part q´ty 500-149 f-1 118084 thread take-up assy 1 f-2 119009 take-up lever support stud 1 f-3 168039 washer 2 f-4 215022 needle bearing 2 f-5 119008 take-up frame 1 f-6 119762 take-up crank pin 1 f-7 119049 bushing 1 f-...
34 anita-b roller presser foot mechanism g1 gp-510-141.
35 anita-b roller presser foot mechanism g1 gp-510-141 ref.No. Part no. Name of part q´ty g1-1 119803 roller preser assy (large) 1 g1-2 119803-1 roller preser assy (middle) 1 g1-3 119802 roller preser assy (small) 2 g1-4 119469 spring washer 2 g1-5 033145 pin 1 g1-6 175109 gear 1 g1-6-1 175109-1 gea...
36 anita-b presser foot bar mechanism g2 gp-510-141.
37 anita-b presser foot bar mechanism g2 gp-510-141 ref.No. Part no. Name of part q´ty g2-1 119019 presser bar bushing (upper) 1 g2-2 700785 screw (m5x0,8x6) 2 g2-3 119018 presser bar bushing (upper) 1 g2-4 118530 presser bar holder 1 g2-5 700510 screw (m6x0,75x8) 2 g2-6 119019-1 presser bar bushing...
38 anita-b right side hook mechanism h1 gp-510-141.
39 anita-b right side hook mechanism h1 gp-510-141 ref.No. Part no. Name of part q´ty h1-1 g400s hook complete with bobbin case 1 h1-1-1 g400s-589 hook complete without cap 1 h1-1-2 g400s-582 hook without cap holder 1 h1-1-3 g400t-017 tension spring fastening screw 1 h1-1-4 g400s-046 gib 1 h1-1-5 g4...
40 anita-b right side hook post mechanism i1 gp-510-141.
41 anita-b right side hook post mechanism i1 gp-510-141 ref.No. Part no. Name of part q´ty i1-2 250084 srew/šroub(m3x0.5x6) 4 i1-3 175267 cover plate 1 i1-4 700336 screw/šroub(m4x0,7x6) 2 i1-5 175318 stud/excentr 1 i1-6 330217 screw/šroub(m5x4.5) 1 i1-7 175324 hook post 1 i1-8 119436 post cap assy 1...
42 anita-b left side post mechanism i3 gp-510-141.
43 anita-b left side post mechanism i3 gp-510-141 ref.No. Part no. Name of part q´ty i3-1 119145 cover plate/kryt 1 i3-2 250084 screw/šroub(m3x0,5x6) 4 i3-3 119721 support plate/levý sloupek 1 i3-4 119144 washer/podložka 2 i3-5 130224 screw/šroub(m5x0,8x12) 2 i3-6 182451 screw/šroub(m6x1,0x14) 1 i3-...
44 anita-b bobbin winder n1 gp-510-141 ref. No. Part no. Name of part q´ty n1-1 p980025248 thread guide/ vodi č úplný 1 n1-7 102243 knife/n ů ž 1 n1-8 102243-1 clamping plate/pérko 1 n1-9 102243-2 clamping plate/pérko 1 n1-10 108093 screw/šroub 1 n1-11 200-002 upper shaft gear winder/kolo náhonu nav...
45 anita-b accessories n2 gp-510-141.
46 anita-b accessories n2 gp-510-141 ref.No. Part no. Name of part q´ty n2-1 123456 accessory bag 1 n2-2 029836 vinyl cover 1 n2-3 800110 spanner 1 n2-4 129915 screw driver (small) 1 n2-5 029946 screw driver (middle) 1 n2-6 029007 screw driver (large) 1 n2-7 134lr needle 10 n2-8 029394 oiler 1 n2-9 ...
47.