ANK Kit1 300B Construction manual & user manual - page 24
Manual is about: 2014 Edition & Kit1-10 C-Core
Single Ended Monoblock Power/Pre Amplifier 8.5W 300B
of
52
23
Get the M4 10mm hardware along with nuts , washers and serrated
ʼ
s in order to install
the output transformers – Feed the 10mm pan screw with flat washer through the
transformer and into the chassis and then secure with serrated washer and M4 nut on
the underside of the chassis ( facing you1)
Transformers installed!