ANK Kit1 300B Construction manual & user manual - Kit1 Interwiring Diagrams
Manual is about: 2014 Edition & Kit1-10 C-Core
Single Ended Monoblock Power/Pre Amplifier 8.5W 300B
of
52
Kit1 Interwiring Diagrams
•
1 Table of Contents
•
2 – Overview of Kit1
•
3 4 5 – 300B Hardwiring Section
•
7,8,9,10 PS board to Driver
•
11 – 6SN7 filament wires
•
12 – connect 5687 filaments in parallel
•
13 – 5687 Filament wires
•
14 – center tap for 5687 (orange/white) 400 400 taps for rectifier tube
•
15 – center taps from Mains connect to GND
•
16 – prepared ground cable from W2 on PS PCB to chassis ground
•
17- filament for 5U4G , & power supply connection to W3
•
18 – GND connections
•
19/20 - 300B DC filaments &
•
21 – Output transformer primary wiring
•
22 – Choke connection to PS PCB
•
23 – 300B Grid Connections from Driver board to 300B Hardwiring area
•
24 – Voltage Checks
•
25 – Input RCA connections to Driver Board