- DL manuals
- Anodyne Electronics Manufacturing
- Media Converter
- SM40
- Installation And Operation Manual
Anodyne Electronics Manufacturing SM40 Installation And Operation Manual - page 9
UT12-000 Universal Encoder/Decoder
SM40 Installation and Operation Manual
May 15, 2012 Rev: 5.00
Page 1-3
ENG-FORM: 800-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
1.4.2 Physical
Specifications
Height
1.50"
(38.10
mm)
Depth 6.2"
(157.48 mm)
5.75” (146.05mm) behind panel
Width 5.75"
(146.05
mm)
5.00” (127.00 mm) behind panel
Weight 1.02
lbs
(544g)
Mounting Dzus
rail
Material/Finish
Aluminum/Conversion Coating
Connector
Filtered 37 pin male Dmin
Lighting
Acceptable for operation with NVG Gen III goggles
1.4.3 Environmental
Specifications
Temperature:
Operating -30
q
C. to +60
q
C
Survival -55
q
C. to + 85
q
C
Altitude 25,000
feet
Humidity 95%
Shock
12 g (all axes)
Environmental categories
RTCA/DO-160C Env. Cat. B4-BA(MN)XXXXXXABBZAUBXXX
End of Section 1.0
Summary of SM40
Page 1
Special notice this product is now licensed to anodyne electronics manufacturing (aem) from northern airborne technology (nat). Aem is responsible for all matters related to this product, including sales, support and repair services. Please note the transition to convert product manuals and supporti...
Page 2: Sm40
Confidential and proprietary to anodyne electronics manufacturing corp. Installation and operation manual rev 5.00 may 15, 2012 anodyne electronics manufacturing corp. 15-1925 kirschner road kelowna, bc, canada. V1y 4n7 telephone (250) 763-1088 facsimile (250) 763-1089 website: www.Aem-corp.Com © 20...
Page 3
Ut12-000 universal encoder/decoder sm40 installation and operation manual installation and operation manual page ii eng-form: 820-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Copyright statement © 2012 anodyne electronics manufacturing corp. (aem), all rights res...
Page 4
Ut12-000 universal encoder/decoder sm40 installation and operation manual installation and operation manual page iii eng-form: 820-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Prepared by: checked by: approved by: the status of this installation and operation man...
Page 5
Ut12-000 universal encoder/decoder sm40 installation and operation manual installation and operation manual page iv eng-form: 820-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Table of contents section title page 1.0 description 1.1 introduction 1-1 1.2 purpose of...
Page 6
Ut12-000 universal encoder/decoder sm40 installation and operation manual installation and operation manual page v eng-form: 820-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Section title page 3.6 transmission (encoding) 3-12 3.6.1 transmitting regular calls: 3-1...
Page 7
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 1-1 eng-form: 800-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Section 1.0 description 1.1 introduction this manual contains information on the ut12-000 universa...
Page 8
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 1-2 eng-form: 800-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 1.4 specifications 1.4.1 electrical specifications input power nominal 28 vdc @ max. 30.3 vdc min....
Page 9
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 1-3 eng-form: 800-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 1.4.2 physical specifications height 1.50" (38.10 mm) depth 6.2" (157.48 mm) 5.75” (146.05mm) behi...
Page 10
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 2-1 eng-form: 805-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Section 2.0 installation 2.1 introduction information in this section consists of unpacking and in...
Page 11
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 2-2 eng-form: 805-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 2.3.3 cabling and wiring all unshielded wire should be mil-w-22759 or equivalent. For shielded wir...
Page 12
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 2-3 eng-form: 805-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 2.4 continued airworthiness maintenance of the ut12-000 is ‘on condition’ only. Periodic maintenan...
Page 17
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-1 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Section 3.0 operation 3.1 introduction information in this section consists of the functional and ...
Page 18
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-2 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.3.2 alphanumeric pushbuttons the alphanumeric pushbuttons ( – , , ) are used for entry of tones ...
Page 19
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-3 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.3.4 button the button is used to select between data mode, one of three tone types, or a scrambl...
Page 20
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-4 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.4 functions 3.4.1 data entry mode operation in this mode, the ut12 operates as a keyboard for th...
Page 21
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-5 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Example: to enter the transmit frequency 151.475 mhz, put the control head edit switch to the ch p...
Page 22
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-6 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Dtmf when dtmf tone type is selected, press to view the last entered dtmf sequence. Press to trans...
Page 23
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-7 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 2) if the tone sequence is to be stored at location xx , press , 3) if the information is to be st...
Page 24
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-8 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.4.2.5 transmission specifics pressing the ptt button on the microphone will not send any tone se...
Page 25
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-9 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. Lam network : when transmitting a call breakdown sequence, the ut12 transmits only the sequence 81...
Page 26
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-10 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.5 reception (decoding) 3.5.1 receiving regular call lam network: when receiving sequences on th...
Page 27
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-11 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.5.4 operation when the transceiver is scanning: in order for the ut12 to decode receive ccir to...
Page 28
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-12 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.6 transmission (encoding) 3.6.1 transmitting regular calls: lam network: mobile : when calling ...
Page 29
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-13 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.7.1 lam – la-m radionetwork call signal response display notes fixed to ut12 u Ö uuuu__ff0ff uu...
Page 30
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-14 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.8 configuration mode 3.8.1 unit configuration there are two methods of programming configurable...
Page 31
Ut12-000 universal encoder/decoder sm40 installation and operation manual may 15, 2012 rev: 5.00 page 3-15 eng-form: 806-0100.Dotx confidential and proprietary to anodyne electronics manufacturing corp. 3.8.3 non-configurable information lam codes: anf codes scrambler deactivated (not used) 81096 sc...