Anova Perspective series Assembly Instructions Manual - page 6
of
7
6
F.
Locate the back panel wire cover and insert its from a high angle into the
LED mounting bracket's slot. Once it is in the slot lower it down onto the
back rest panel.
G.
Mount one of the 5/16"-18 x 1" Allen head screws to the left end casting
aligning the screw with the curve on the back panel wire cover.
Then tighten all of the screws on the rear back panel with the 1/4" Allen
wrench.
5/16"-18 x 1"
Allen head screw
LED Mounting
Bracket Slot