Anritsu MG3700A MG3700A Product Introduction - page 5
Connection to LAN
MG3700A Vector Signal Generator
3
[Method 1: Direct connection] 2/4
1. Setting of a PC (slightly differs depending on the type of OS)…continued
Activate a radio button of [Use the following
IP address] and enter an arbitrary address in
the edit box of [IP address].
The IP address entered here must be different
from the address of MG3700A that will be
specified later.
Also, [Subnet mask] and [Use the following
DNS server addresses] are set automatically
in the course of operations above.
Click [OK] after specifying an IP address.
Click [OK] in the [Local Area Connection
Properties] window.
Open [Network and Dial-up Connections] from [Start] > [Settings] > [Control Panel].
Right-click on [Local Area Connection] and select [Disable].
Subsequently, right-click on [Local Area Connection] and select [Enable].