Ansr Audio AW-71 User Manual - page 8
Manual is about: Frequency agile wireless microphone system
of
16
WIRELESS
7
LINE
MIC
AC/DC
ADAPTER
• Plug the DC 12V 500mA power supply into
the power connector on the back of the
receiver.
• Connect the receiver output to the audio
mixer or amplifier input, using a standard
audio cable with 3-pin XLR connectors or ¼
in. phone plugs. Never use the balanced and
unbalanced audio outputs at the same time!
This may cause signal loss or increased
noise.
• Matching the Mic / Line selector position of
receiver with the audio Mixer before
connecting with Mixer.
For Mic (-20dB)
For Line (0dB)
•
6.1 Connecting the Receiver
AC/DC
ADAPTER
Balanced or unbalanced audio cable
AUDIO MIXER
AMPLIFIER
LOUDSPEAKER
SET UP
6. Set Up
.
¼ in.
¼ in.