Ft-50 fire training fog machine user manual english © 2017 antari lighting and effects ltd..
3 user manual - english safety information please read the following safety information carefully before operating the machine. This information includes important safeguards about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed o...
4 contact your local antari dealer for advise. ․ before transporting the machine, make sure the aerosols is removed ․ fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it securely. In case of eye contact or if fluid is swallowed, immediately look for medical advice. Unpa...
5 product overview operation step 1: place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine. Step 2: check and cleared any foreign object in the threaded aerosol insert. Align aerosol valve with threaded insert and carefully turn clockwise ...
6 step 3: connect the machine to suitable rated power supply. To determine the power requirement for the machine refer to the label on the back of the machine. Always connect the machine to a protected circuit and ensure it is properly grounded to avoid risk of electrocution. Step 4: turn on the mac...
7 aerosols only use antari flp-700 aerosol for the ft-50 fire training fog machine. The machine is tested and calibrated with this aerosol to get the best output performance. Warranty will be void if any other type of aerosol is used, improper use of aerosol may lead to machine failure and malfuncti...
8 breaker 120v = 15a 250v 230v = 8a 250v technical specifications input voltage us 120v eu 230v uk 240v jp 100v breaker 120v = 15a 250v 230v = 8a 250v heater 1450w warm-up time 7.5 min. (approx.) fluid consumption 110 ml/min compatible fluid antari flp aerosol power connection iec dimension l 346 x ...
12 c08ft0500
