Antari Ip-1000 User Manual - page 5
IP-1000 External View
Technical Specifications
Performance Note
All fog machines develop condensation around the output nozzle. Because this may result in
some moisture accumulation on the surface below the output nozzle, consider this
condensation when installing your unit.
All fog machines may sputter small amounts of fog occasionally during operation and for a
minute or so after being turned off.
All fog machines have a recycling period after long bursts when the machine will shut itself
down for a short period in order to heat up again. During this time no fog can be produced.
Cleaning and Storage
Cleaning your fog machine regularly can help you reduce the frequency of parts replacement
and the cost of maintenance.
After 40 hours operation, we suggest you use distilled water to clean the heater as following
steps:
01. Body
02. Handle
03. Foot
04. Wired remote controller
05. Water-proof cover
06. Power cord
07. Adaptor with nut
08. Nozzle
Model
Power supply
Power consumption
Fog output volume
Fluid consumption
Weight
Dimensions (LxWxH)
Remote included
First (from cold machine) warm-up time
IP-1000
110 ~ 230 V AC 50/60 Hz
1,000 W
10,000 cubic feet / per minute
24 minutes / per liter
8.8 kg
355 x 249 x 147 (mm)
IP-10
10 minutes
E
ng
lis
h
- G
er
m
an
-
Fr
en
ch
-
中
文
03
08
04
05
06
07
03
02
01